Pioneer A-107 Manual Petunjuk Pengoperasian - Halaman 10
Jelajahi secara online atau unduh pdf Manual Petunjuk Pengoperasian untuk Penguat Pioneer A-107. Pioneer A-107 12 halaman. Stereo
Juga untuk Pioneer A-107: Panduan Servis (8 halaman), Panduan Petunjuk Pengoperasian (13 halaman)
Halaman Cetak
OPERATIONS
TO USE THE COMPONENT CONNECTED
TO THE TAPE 2 MONITOR TERMINALS
[For a cassette deck]
÷ A cassette deck connected here can be operated in the
same way (recording and playback) as a deck connected to
the TAPE 2 MONITOR terminals.
÷ Also, if two decks are used, you can copy tapes from one
deck onto the other (see the section on "COPYING TAPES").
1. Set the TAPE 2 MONITOR button to ON.
2. Operate the cassette deck to perform playback
(or recording).
NOTE:
The source selected with the INPUT SELECTOR knob is
backed up for a few days even when the POWER switch is set
to off or the power cord is unpluged.
After this period, the CD is automatically selected when the
power is supplied.
[For an adaptor component]
By connecting a graphic equalizer, source sounds (from discs,
tapes, AM/FM broadcasts, etc.) can be heard with added
sound and tone compensation.
Sounds compensated with the adaptor component can be
recorded on the cassette deck connected to the TAPE 1/MD
terminals.
1. Set the TAPE 2 MONITOR button to ON.
2. Play back the source.
3. Operate the adaptor component.
NOTE:
Be sure to perform this operation with the adaptor component
power switch in the on position. Even when not using the
adaptor component, its power switch must be left on. If the
adaptor component is switched off, no sound will be pro-
duced, or the playback sound will be distorted.
10
<ARB7137>