Pioneer A-403 Panduan Petunjuk Pengoperasian - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penguat Pioneer A-403. Pioneer A-403 12 halaman.
SPECIFICATIONS
[A-403]
Amplifier Section
Continuously Average Power Output is 60 Watts per
channel, min., at 8 ohms from 20 Hertz to 20,000
Hertz, with no more than 0.05 %** total harmonic
distortion.
Continuous power output (both channels driven at 20 Hz to 20 kHz)**
TAD
sOi05. 96) Bie
seccisasatve spcboucceteck cox tee dascdenders 60 W + 60 W*
STH B0:1 6, 4 Oe eer
ee
ideo devvecrecescededve 80 W + 80 W*
Dynamic power output (on EIA dynamic test signal}
42/22
++ 110 W/130 W
Total harmonic distortion
20 HZ.40:20 KHZ; 30 Wi) 8 Ooo jceceedeccesseensecsctccusteteotsens
0.03 %*
Input sensitivity/impedance
PHONO (MM)
.- 2.8 mV/50 kQ
CD, TUNER, LINE, TAPE
- 200 mV/50 kQ
Output level/impedance
TAPE REC, ADAPTOR OUTPUT
.......cececcesseeeesseeees 200 mV/1 kQ
Frequency response
PHONO (MM)
20 Hz to 20 kHz +0.5 dB
CD, TUNER, LINE, TAPE
Tone control
.. 5 Hz to 100 kHz 78 dB*
BASS ..
. £8 dB (100 Hz)
TREBLE
. £8 dB (10 kHz)
Muting ..
—20 dB
Loudness contour (volume control set at —30 dB position)
+5 dB (100 Hz)/+-3 dB (10 kHz)
Signal-to-Noise ratio (IHF short circuit, A network)
PHONO (MM, 5 mV input)
CD, TUNER, LINE, TAPE ..
85 dB*
107 dB*
Power Supply/Miscellaneous
Power Requirements .........00-+ AC 110 V/120—127 V/220 V/240 V
(Switchable), 50/60 Hz
Power Consumption 11... ssceccceseseerccesseereseecsesereeneresnasees 560 W
AC outlets
Switched (x 2) ....
. 200 W
Unswitched (x 1)
100 W
Dimensions ..........
- 420 (W) x 360 (D) x 125 (H) mm
Weight (without package)
7.5 kg
Accessories
Operating instructions .
NOTE:
Specifications and design are subject to possible modifications
without notice, due to improvements.
*Measured with DIRECT button set to on.
**Measured by Audio Spectrum Analyzer.
[A-303]
Amplifier Section
Continuously Average Power Output is 40 Watts per
channel, min., at 8 ohms from 20 Hertz to 20,000
Hertz, with no more than 0.05 %** total harmonic
distortion.
Continuous power output (both channels driven at 20 Hz to 20 kHz}**
THD 50-05: 6,-8: i s.ciccoesstiewecbccccsasdsssiea debasvidesess 40 W + 40 W*
THD? 4
4B v5 i cdecesdededenide stucsessdcegecsncecteres 50 W + 50 W*
Dynamic power output (on EIA dynamic test signal)
49/22
Total harmonic distortion**
20 Hz to 20 KHz, 20 W, 8 & ....ssssccssecessserreesesernnenerersnee 0.05 %*
Input sensitivity/impedance
PHONO (MM)
ws. 2.8 mV/50 kQ
CD, TUNER, LINE, TAPE
.
Output level/impedance
+» 200 mV/50 kQ
TAPE REC, ADAPTOR OUTPUT
.......cseseccesesereerees 200 mV/1 k&
Frequency response
PHONO (MM)
20 Hz to 20 kHz +0.5 dB
CD, TUNER, LINE, TAPE
.
Tone control
BASS .
- +8 dB (100 Hz)
TREBLE
+ £8 dB (10 kHz)
Loudness contour (volume control set at —30 dB position)
ea
« +5 dB (100 Hz)/+3 dB (10 kHz)
Signal-to-Noise ratio (IHF short circuit,
A network)
PHONO (MM, 5 mV input)
.
CD, TUNER, LINE, TAPE
.
... 5 Hz to 100 kHz *$ dB*
Power Supply/Miscellaneous
Power Requirements .............. AC 110 V/120—127 V/220 V/240 V
(Switchable), 50/60 Hz
Power Consumption 252 .csiecsesaneceseovestsncesseccchtcecegessesveyess 450 W
AC outlets
Switched {x 2) ...
Unswitched (x 1}
Dimensions ...
Weight (without package) .
200 W
100 W
+ 420 (W) x 360 (D) x 125 (H) mm__
6.5 kg
Accessories
Operating /instrictions:sec05
eecas2s has cdeeanes cadence ccevecaneasededeesee 1
NOTE:
Specifications and design are subject to possible. modifications
without notice, due to improvements.
*Measured with DIRECT button set to on.
**Measured by Audio Spectrum Analyzer.
Published by Pioneer Electronic Corporation.
Copyright © 1994 Pioneer Electronic Corporation.
All rights reserved.
11
<ARE1316>
En