AEONS Technologies 6U Panduan Pemilik

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Kandang AEONS Technologies 6U. AEONS Technologies 6U 6 halaman. 19” wall mounted equipment enclosure

Halaman Cetak

Owner's Manual

Rev. 2.5

19" Wall Mounted Equipment Enclosure

Important Safety Instructions:

This manual contains instructions and warnings that must be followed during the installation and

operation of the product described in this manual. Failure to comply may invalidate the warranty and

cause property damage or personal injury.

Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses,

conductive contaminants, dust and direct sunlight. Leave adequate space at the front and rear of the enclosure for proper ventilation. Do

not block, cover or insert objects into the external ventilation openings of the enclosure.

The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unass isted. Use

a mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container. Inspect the shipping container and the

enclosure for shipping damage. Do not use the enclosure if it is damaged. Leave the enclosure in the shipping container until it has been

moved as close to the final installation location as possible.

Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty. Save all

packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage

that will void the warranty.

Install the enclosure in a structurally sound area capable of handling the load, or on a level floor that is able to bear the weight of the

enclosure, all equipment that will be installed in the enclosure and any other enclosures and/or equipment that will be installed nearby.

For permanent wall mounting, be sure to securely fasten the enclosure to the building structure before operation. Do not place any object

on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.

Hardware List

M6 Screw (A)

M6 Cage Nut (B)

Professional Series

Models: 6U, 9U, 12U, 15U, 18U, 22U

M5.5 Self-Tapping (C)

M5.5 Conical (D)

Wrench (E)