Pioneer A-757 Panduan Petunjuk Pengoperasian
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penguat Pioneer A-757. Pioneer A-757 13 halaman.
Juga untuk Pioneer A-757: Panduan Petunjuk Pengoperasian (14 halaman)
![Pioneer A-757 Panduan Petunjuk Pengoperasian](/uploads/products/server2/6625140/6625140.jpg)
STEREO AMPLIFIER
le evs
ass Oar
"A-656" is not available in U.S.
Operating
Instructions
The illustration shows model A-757.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know
how to operate your unit properly, After you have finished reading
the instructions,
keep the manual
in a safe place for future
reference.
In some countries or regions, the shape of the power plug and
power
outlet
may
sometimes
differ from that shown
in the
drawings. However, the method of connecting and operating the
unit is the same,
WARNING
:: To PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[FOR U.S. and Canadian models]
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
[For Canadian model]
CAUTION:
To PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED)
PLUG
WITH
AN EXTENSION
CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION
:; POUR
PREVENIR
LES
CHOCS
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF Si LES LAMES
PEUVENT ETRE INSEREES
A FOND SANS EN LAISSER
AUCUNE PARTIE A DECOUVERT.
LINE VOLTAGE SELECTOR SWITCH
Only
multi-voltage
models
are
provided
with
this
switch. U.S., Canadian, European, U.K., and Australian
models are not provided with this switch.
Mains
voltages
in Saudi
Arabia
are
127V and
220V
only. Never use this model with 110V setting in Saudi
Arabia.
The line voltage selector switch is on the rear panel. Before your
model is shipped from the factory, this switch is set to the power
requirements of the destination. Check that it is set properly before
plugging the power cord into the AC wall socket. If the voltage is
not properly set or if you move to an area where the voltage
requirements differ, adjust the selector switch as follows.
1.
Use a medium-size screwdriver.
2.
Insert the screwdriver into the groove on the voltage selector,
and adjust so that the tip of the arrow points to the voltage
value of your area.
VOLTAGE SELECTOR
120-127 HOV
2s0v
204
a
Py
eA SF
Medium-size
screwdriver
@ PIONEER'
The future of sound and vision.
iif