Pioneer C-90S Panduan Petunjuk Pengoperasian - Halaman 30
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penguat Pioneer C-90S. Pioneer C-90S 32 halaman. Stereo control amplifier
Halaman Cetak
OPERATIONS 2 (Applications)
Normal
stereo
playback
is based
on three-dimensional
sound
from the front (speakers) direction only. In fact, however, when
listening to an actual live concert at a concert hall or theater,
sound is heard not only from the front, but it envelops the body
from all sides, reverberating off the high ceiling and wide wall
area,
Such
sound
qualities
form
elements
of the sense
of
"presence" and "spatial breadth" felt at such live concerts. The
surround
system
is a means
of reproducing
this
sense
of
presence and breadth.
{C-90 Operations]
{1} Set the input selector switch to the playback component.
{2} Set the audio adaptor switch to ON.
{Surround processor operations}
Refer to the Operating Instructions for the surround processor us-
ed.
NOTE:
When using the surround processor, set the INPUT LEVEL switch
to the 10.15 VJ] position.
Power amplifier
Unified system
control can be performed when
using Pioneer
components equipped with control input terminals, and bearing
the
mark.
[Connections]
Connect the contro! input and output terminals in order.
Be sure to connect properly, since system control Icannot be per-
formed when video or audio cables are not connected.
[Operation]
The remote control junit furnished with the C-90 can be used to
perform remote control of the major functions of the control-con-
nected components.
Oar
Remote control
unit
|
When
the telelvision's
CONTROL
OUT
is connected
to the
amplifier'
CONTROL
IN, point the remote
contro! unit at the
remote
sensor
on the television
set when
performing
remote
operations. Be sure that the television set's main power switch is
ON.
Remote controt
unit
30
<ARB1140>