Pioneer F-Z92 Panduan Petunjuk Pengoperasian - Halaman 21
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penguat Pioneer F-Z92. Pioneer F-Z92 28 halaman. Stereo double cassette tape deck amplifier
Juga untuk Pioneer F-Z92: Panduan Petunjuk Pengoperasian (29 halaman)
Halaman Cetak
TAPE FADER
{function for fading out recorded tapes}
With this function, it is possible to change any portion of a recorded
tape into a fade-out.
Sound fades to no-signal recording after approx,
two to three
nds and the tape stops after approx.
10 seconds.
When the tape is played back, the sound will gradually start decreas-
ing from the beginning of the faded portion, and be cut off completely
in approxirnately
1O seconds
1, Load the recorded tape into deck ft
Tape fader can not be used on deck |
2, Operate deck Il to set the tape to the beginning of the portion to
be faded out.
3. Press the FADER switch 3).
© The FADER indicator will fight. The DIRECTION indicators (B and
~@)} flash
4. Press the PLAY switch (Be or ~«@) i).
* The fade-out operation will start, then stop after approximately
10 seconds
NOTE:
* Hfunwanted sound remains after the fade-out, use the MUTE switch
( O/ to erase it.
* Make sure that the cassette's accidental erasure prevention tab (for
the side in use) is not broken off.
A.S.E.S.
(Auto Synchro Editing System)
(This function can be used with the Pioneer PD-272T or PD-282M CD
player when the CONTROL terminal of the CD player is connected to
that of the tuner.)
For automatic recording of a CD to a cassette tape. This unit offers three
kinds of ASES operation.
FADE:
The sound will fade out automatically at the end of the tape
PARALLEL:
Deck | and deck I record at the
same time
The sound will fade out automatically at the end of the
tape.
Hf one of the decks stops at the end of the tape, or if the
STOP switch is pressed to stop one of the decks,
then
the other deck will switch into the FADE mode, the PARA)
indicator will go aut, and the F
indicator wall ight
RELAY:
© When used together with the PD-272T, deck Hf will record
disc If after deck | finishes recording disc |
DISC 4
Deck [ _
« When
used together with the PD-282M_
recording will
continue on deck Hl after recording finishes on the tape in
deck |.
In either
, the sound will fade out automatically at the end
of the tape
Wf the STOP
switch
is pressed on deck
| while deck | is
recording, then deck I will shift to the FADE mode and begin
ASES. TheR
Vindicator will go out and thelF/ DEjindicator
jal
=
will light
* Recording starts from the forward (® } direction.
® During both side
recording, when the tape ends in the middle of a
song in the forward (% ) direction, it will restart from the beginning
of the song when recording continues in the reverse { ~@)} direction
1. Put discs in the CD piayer.
2. Put a tape to be recorded in deck I.
Put tapes to be recorded in both deck { and deck fl if you are going
to perform PARALLEL or RELAY recording
Set the DOLBY NR switch ) te the desired position.
Set the REVERSE MODE
switch ©? to the desired position.
To record the sound passed through the equalizer, turn on the
EQUALIZER switch and use the equalizer controls to adjust the
sound quality.
6. Press one of the ASES switches (FADE, PARALLEL, RELAY)
Faw
a
o a
1, BEC RELAY
When Reverse Mode Switch is at'
=~
pay
The cassette tape for recording is rewound to the beginning.
Recording of the cassette tape begins in the forward direction.
Playback begins on the CD player.
hae
et
BW
REC
PLAY
4,
+ When Reverse Mode Switch is at"
"SS "9
7. To stop ASES operation, press the STOP switch (Mm) of the deck
currently recording.
NOTE.
* Do not attempt
to perform
manual
operations
during A.S.
operation.
SLEEP
TIMER
—— Automatically turns off power.
Use the supplied remote control unit to operate.
Power turns off auto.
matically after your
set time has elapsed.
Each time you press
the SLEEP key, the setting changes in the sequence
shown here.
+ 930
— — *
60
~ 30
ee
ee
When the WAKE
UP timer is on, the sound fades out when the SLEEP
TIMER cuts the power.
However, when the WAKE
UP timer
is off, or
when WAKE
UP 1 or WAKE
UP 2 are on and the volume setting is *,
then there ts no fadeout.
21
<ARBII66>