Pioneer GM-A3702 Panduan Pemilik - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Pioneer GM-A3702. Pioneer GM-A3702 16 halaman. Bridgeable two-channel
Juga untuk Pioneer GM-A3702: Panduan Pemilik (19 halaman), Panduan Pemilik (33 halaman), Panduan Pemilik (33 halaman)
Halaman Cetak
Setting the unit
If amplifier gain is raised improperly, this will
simply increase distortion, with little increase
in power.
Signal waveform when outputting at
high volume using amplifier gain
control
If the signal waveform is distorted due to high
output, even if the amplifier gain is raised, the
output power will change only slightly.
Connecting the units
Connection diagram
1 Special red battery wire
RD-223 (sold separately)
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
of the amplifier to the positive + battery term-
inal.
2 Ground wire (Black)
RD-223 (sold separately)
Connect to metal body or chassis.
3 Car stereo with RCA output jacks (sold sepa-
rately)
4 External output
5 Connecting wire with RCA pin plugs (sold se-
parately)
6 Speaker input terminal (use a connector in-
cluded)
Please see the following section for speaker
connection instructions. Refer to Connections
when using the speaker input wire.
7 RCA input jack
8 System remote control wire (sold separately)
En
Autogoods "130"