Pioneer M-IS22 Panduan Petunjuk Pengoperasian - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penguat Pioneer M-IS22. Pioneer M-IS22 28 halaman. Cd tuner deck; stereo power amplifier; speaker system
Juga untuk Pioneer M-IS22: Panduan Petunjuk Pengoperasian (46 halaman), Panduan Servis (22 halaman)
Halaman Cetak
Getting started
OPEN/
CLOSE
STEREO CD TUNER DECK XC-IS22CD
CD
ENHANCE
BASS
TUNER
Playing cassette tapes
This unit has a tape deck that can be used for both recording
and playback. Other features include auto-reverse and Dolby B
Noise Reduction.
• Auto-reverse lets you play or record a tape without physically
taking it out and turning it over.
• Dolby B NR reduces hiss on tapes recorded using Dolby B NR
(which includes almost all commercially recorded tapes).
1
Press the TAPE button then press TAPE OPEN/CLOSE
0 (front panel) or 0 (remote) and load a recorded
cassette.
Be sure to insert the cassette in the direction shown.
Press TAPE OPEN/CLOSE 0 again to close the tray.
2
3
Press DOLBY NR ON/OFF (front panel only) to
switch Dolby B NR on or off as required.
4
Press REVERSE MODE (front panel only) to select the
reverse mode.
Press repeatedly to choose between:
• " (single side playback)
• [ (auto-reverse playback: stops after finishing playback in
the 'reverse' (2) direction)
• " (continuous playback (up to 16 complete plays))
Press 23 (remote) or 6 (front panel) to start
5
playback.
The side of the tape you'll hear is whichever is face up when you
load it. This is the 'forward' (3) direction, while the other side
is 'reverse' (2). The forward indicator is shown in the display.
To play the other side of the tape, press 23 (6).
6
Each time you press 23 (6) during playback, the other
side of the tape starts playing. Pressing 23 (6) when the
tape is stopped starts playback on the side it was playing
previously.
The current tape direction is indicated in the display.
STANDBY
/ON
SLEEP PROGRAM RANDOM REPEAT
T APE
FOLDER/TRACK
MONO
TREBLE
LINE1.2
DIMER
MUTE
DISP
TUNER LINE1.2
OPEN/CLOSE
1
2
3
CLEAR
4
5
6
>10
7
8
9
10/0
SONUD MODE
VOL
7
To skip back or forward a track on the tape, press
– · 4 or ¢ · +.
On the front panel, press –·1/4 or ¢/¡·+ (the
tape should be playing when you do this).
¢ · + searches for the next blank space between tracks on the
side currently playing (in other words, to the start of the next
track), then resumes playback.
– · 4 searches for the previous blank space between tracks on
the side currently playing (in other words, to the start of the
current track), then resumes playback.
Note
Track search is unlikely to work reliably in the following cases:
• If the space between tracks is less than about 4 seconds.
• If the recording is particularly noisy so the spaces are not
recognized.
• If the recording contains frequent silences, such as a
language study tape.
• If the recording contains sections of very quiet material,
such as some classical music recordings.
To stop playback, press 7.
8
To fast wind the tape, press 1 or ¡.
9
On the front panel, press –·1/4 or ¢/¡·+ (the
tape should be stopped when you do this).
1 rewinds the tape, regardless of the tape direction at the
time. ¡ always forward-winds the tape.
Resetting the tape counter
The tape counter indicates the current location of the tape. The
counter increases when the tape is travelling forwards and
decreases when it's travelling in reverse (playing or fast
winding). The tape counter returns to zero automatically when
you eject a tape. To reset it manually:
Press 7 while the tape is stopped.
•
The counter returns to 0000.
4
TAPE
OPEN/CLOSE0
15
En