Pioneer PREMIER PRS-D1200M Panduan Pemilik - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Pioneer PREMIER PRS-D1200M. Pioneer PREMIER PRS-D1200M 50 halaman. Class d mono amplifier
Juga untuk Pioneer PREMIER PRS-D1200M: Panduan Pemilik (20 halaman)
Halaman Cetak
Installation
Attaching the bass boost remote
control
Attach with tapping screws (3 mm × 10 mm) at an
easily accessible location such as under the dash-
board.
15
Tapping screw
(3 mm × 10 mm)
Example of installation on the floor
mat or on the chassis
1. Place the amplifier where it is to be
installed. Insert the supplied tap-
ping screws (4 mm × 30 mm) into
the screw holes. Push on the screws
with a screwdriver so they make
marks where the installation holes
are to be located.
2. Drill 2.5 mm (1/8 inch) diameter
holes at the point marked, and
install the amplifier, either on the
carpet or directly to the chassis.
Replacing the top cover
1. Align the unit and top cover, and
insert the screw.
• The cover can be installed in the desired
direction to match to the amplifier.
2. Tighten the screw with a 4 mm
hexagonal wrench.
Screw
Top Cover
Drill a 2.5 mm (1/8 inch)
diameter hole
Tapping-screws
(4 mm × 30 mm)
Floor mat
or chassis