Pioneer VSA-1000 Panduan Petunjuk Pengoperasian - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penguat Pioneer VSA-1000. Pioneer VSA-1000 35 halaman. Av digital surround amplifier
Juga untuk Pioneer VSA-1000: Panduan Petunjuk Pengoperasian (35 halaman)
Halaman Cetak
CONNECTIONS
Speakers Connections
* |llustration shows U.S. model.
Set the IMPEDANCE
SELECTOR
switch (See page 11).
q
How
to install
the
rear
speaker
cords.
Connect the center speaker in the
same way.
Front speaker (left)
® oO
Insert the cords while pressing the
levers and then release the levers.
THE S-VIDEO CONNECTORS
When using a VCR, LDP or monitor TV which has S-VIDEO connectors,
they can be connected to the S-VIDEO connectors.
For the operation of components connected to S-VIDEO connectors,
refer to the instruction manuals of each component.
NOTE:
¢ In this unit, the S-VIDEO connectors (Y-C separate) and the regular
pin jacks are independent, so any signal input through a pin jack must
be output from the pin jack, and any signal input through an S- VIDEO
connector must be output through the S- VIDEO connector.
¢ The S-VIDEO connector is for video only, so be sure to make audio
connections also.
Precautions when connecting a monitor TV that automatically selects
between S-VIDEO input and regular video input.
The following conditions may arise if both the S-VIDEO connector and
regular video connector (pin jack) are connected to the same TV input
facility.
* if the AMP/TV
DISP key is pressed
for indication display during
playback from a component connected with a regular pin jack, the
picture will disappear.
This is because the indication display signal is also added to the
S-VIDEO signal, causing the monitor to detect S-VIDEO input and
therefore automatically select S-VIDEO as the source.
In this case, connect
the VSA-1000
VIDEO
OUT
(pin jack) to a
different S-VIDEO input jack on the monitor TV and switch manually.
OSS
ROTO
NS
RRS ST
EN
EU
Nn
Rear speaker (left)
"=
(REAR SPEAKERS
Payiw
Ao
Center speaker
Front speaker (right)
©
©
Rear speaker (right)
How to use S-VIDEO connectors.
no
o
1)
S-VIDEO
jack
i)
Check the position of
the holes and insert.
tt
For the method of switching the monitor TV S-VIDEO connector/ VIDEO
jack, refer to the monitor TV's instruction manual.
S-VIDEO plug
15
<ARB1177>