Pioneer 156729 Buku Petunjuk - Halaman 15
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemutar CD Pioneer 156729. Pioneer 156729 28 halaman.
Halaman Cetak
Basic Operation
Turning On CD Player
STANDBY/ON
To turn on the CD Player, press the
[
STANDBY/ON] button on the unit or the remote
Í
controller. Press the [
STANDBY/ON] button
Í
again to set the CD Player to Standby.
Setting Auto Standby (ASb)
ENTER
SETUP
You can specify that if the CD Player is left stopped
for 30 minutes, the power will automatically turn off,
placing the unit in Standby mode (Auto Standby
function).
On the North American model:
The default setting is "Off".
On the European model:
The default setting is "On".
Make settings for this function while playback is
stopped.
1
Press the [SETUP] button.
2
Use the [
] or [
] button to display "ASb";
then press the [ ENTER ] button.
3
Use the [
] or [
] button to switch "Off" or
"On"; then press the [ ENTER ] button.
4
"COMPLETE" appears on the display.
STANDBY/ON
Note:
If playback is paused, the power will remain on
even after 30 minutes have elapsed; the Auto
Standby function will not operate.
Changing the Display Brightness
Press the remote controller's [DIMMER]
button repeatedly to select the following
options:
Normal
Using Headphones
Turn down the volume, then connect your stereo
headphones to the [PHONES] jack.
You can adjust the volume by using the [PHONES
LEVEL] knob.
Dim
Dimmer
PHONES
jack
En-
15