Pioneer CLD-99 Panduan Petunjuk Pengoperasian - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemutar CD Pioneer CLD-99. Pioneer CLD-99 31 halaman. Cd cdv ld player
Halaman Cetak
BASIC CONNECTIONS
e Use an AV TV with video/audio inputs (or a monitor TV).
1
UHF antenna
VHF antenna
Supplied S-VIDEO cable
Supplied video cord
Connect to the stereo amp's CD, LD, VDP, or other input
jack with the supplied audio cord. (Do not connect to
the PHONO jack.)
You can connect to the TV's audio input jack, but it is
recommended you connect to the stereo amplifier to
obtain superior audio playback quality.
These connections are also possible
elf you have a stereo amplifier with optical or coaxial inputs,
refer to page 10. Connection to this unit's digital output
(optical or coaxial) is possible.
elf you have a Pioneer projection monitor, refer to page 11. You
can connect to this unit's control jack for system remote
control.
elf you have an AV amplifier bearing the Pioneer i mark, refer
to page 11.
You can connect to this unit's control jack for system remote
control,
Connect the supplied video cord.
If the TV has an S-VIDEO input jack, connect a the supplied $-VIDEO cable.
This unit features 3-D Y/C separation circuitry so it is recommended you
connect an S-VIDEO cable to obtain superior picture quality.
Align
the
plug
Orn
S plug
correctly and push
into the S-VIDEO jack.
i, Om
lf you use an S-VIDEO cable, refer to your TV's operation
manual.
:
Finally, connect the power
cord to the wail socket.
Once the power cord is connected, even if you
switch power OFF, power is still supplied to the
player's built-in memory (Resume play function
etc.). For this reason, make sure the unit is connected
to the wall socket. If you connect to the amplifiers
standby power SWITCHED OUTLET socket or other
socket, functions such as Resume play will not
operate.
AC-3 RF OUT terminal:
This terminal is intended for use with Dolby AC-3* components
(*1) planned for future release. With this terminal, you will be
able to connect an AC-3 RF input of amplifiers and surround
processors, and playback LDs formatted with Dolby AC-3 (*2).
(*1) Indicated with Dibeerseess] (For hardware)
(*2) Indicated with DQEsssmcms) (For software)
e@ You cannot playback currently available LDs, LD players, AV
amplifiers, etc., with this terminal.
@ Do not connect this terminals to the audio input terminal of a
normal stereo or AV amplifiers.
* "Dolby", "AC-3" and the double-D symbol are trademarks
of
Dolby Laboratories Licensing Corporation.
9
<VRB1139 >
En