Dinan D120-0491 Petunjuk Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Aksesori Mobil Dinan D120-0491. Dinan D120-0491 2 halaman. Anti-roll bar 2006-07 m5, 2006-07 m6
Halaman Cetak4.
Separate the stock anti-roll bar from vehicle by removing the bushing clamps and
bushings.
Remove stock anti-roll bar from car.
The Dinan Engineering anti-roll bar fits like the original. Carefully maneuver the
anti-roll bar into place.
Attach anti-roll bar to vehicle using the stock bushing clamps and Dinan urethane
bushings. Lubricate the bushings with the included urethane grease (or an
equivalent high-pressure, waterproof, grease). The anti-roll bar should be
centered beareen the clamps!
Attach endlinks to the Dinan anti-roll bar. See Figure for a description of the
adjustments.
o
lf bar is being used with a stock suspension, aftach endlink to the last hole (for
minimal oversteer).
o
lf bar is being used with a Dinan suspension, atach endlinks to the middle hole.
We hope you enjoy your new Dinan Engineering anti-roll bar!
TEER
5.
6.
7.
ra
MORE
UNDERS
MORE
OVERSTEER
tNs t33-049 t
Page 2 of 2
Rev. l/28/08