Pioneer Super Tuner IIID DEH-P4100 Panduan Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pemutar CD Pioneer Super Tuner IIID DEH-P4100. Pioneer Super Tuner IIID DEH-P4100 6 halaman. Multi-cd control high power cd player with fm/am tuner
Juga untuk Pioneer Super Tuner IIID DEH-P4100: Panduan Servis (2 halaman)

Halaman Cetak

DFS Alarm Installation

CAUTION

• Because of the complexity of today's technically advanced vehicle wiring sys-

tems, we recommend that your DFS Alarm be installed ONLY by a professional

Pioneer installer.

Affix the included deterrent stickers to the inside of the front door windows.

Description

7 White/yellow (DOOR SWITCH) ........................................................................ (Fig. 3 & 4)

This lead is used to trigger DFS Alarm when any door is opened and may be connected to

either positive or negative (+/–) type door pin switches.

7 Brown (ALARM OUTPUT) ........................................................................................ (Fig. 5)

This lead is a pulsed positive (+) output capable of driving up to 2 relays (500 mA) max.

Use this lead to trigger relays for siren, horn, honk or flashing lights.

Door Switches

The DFS Alarm's door trigger input is designed to work with either positive or negative

door pin switches. After hookup, simply set door system type from DFS Alarm Setting

Menu.

Domelight Delay-DFS Alarm will wait for last door to close and courtesy light to turn off

before Exit Delay Timer Starts.

DOOR SWITCH (White/yellow)

Grounding Type Switch:

GM, Chrysler, Japanese, and most European vehicles.

Note:

• Set DFS Alarm to recognize ground trigger from DFS Alarm Setting Menu. Set Door System to

"DOOR-L :CLS".

This Product

Brown (refer to "ALARM OUTPUT".)

White/yellow

Fuse holder

Dome light

Factory Door Switches

Positive (Non-grounding) Type Switch:

Ford, Jaguar, Mercedes

Note:

• Set DFS Alarm to recognize positive trigger from DFS Alarm Setting Menu. Set Door System to

"DOOR-H :CLS".

Brown (refer to "ALARM OUTPUT".)

White/yellow

Dome light

Factory Door Switch

Fuse holder

Installing New Pin Switches

Fig. 3

Separately sold pin switches are available that can be used to protect your vehicle's trunk,

hood etc. When you purchase these, make sure that you first confirm that they can be used

with your vehicle's door system type.

Follow the makers instructions as to installation and wiring.

ALARM OUTPUT (Brown)

The brown lead provides a +12 V, pulsed output while alarm is sounding. This lead has a

maximum current capability of 500 mA and can be used to trigger a relay to sound a siren,

horn or flash lights.

Recommended Wiring:

30 amp relay (sold separately) required to operate siren, horn or lights.

• Connect Brown wire to one side of relay coil.

• Connect ground to other side of coil.

For sirens, horns or lights requiring +12 V trigger

This Product

• Connect normally open to fused, constant +12 V source.

For horns or lights requiring ground trigger

• Connect normally open pin to ground.

RELAY

(Sold separately)

30A Fuse

Fig. 4

(Sold separately)

30A

BATT

GND

≠

Car battery

This Product

Brown

White/yellow (refer to "DOOR SWITCH".)

CONTROL

OUTPUT

Horn/Siren etc.

Fig. 5