Pioneer XDV-M8137ZT-91/UC Panduan Servis - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Servis untuk Pemutar CD Pioneer XDV-M8137ZT-91/UC. Pioneer XDV-M8137ZT-91/UC 38 halaman. Lexus 2003 lx470
Juga untuk Pioneer XDV-M8137ZT-91/UC: Panduan Servis (38 halaman)

Pioneer XDV-M8137ZT-91/UC Panduan Servis
1
A
For details, refer to "Important symbols for good services".
- This service manual should be used together with the manual(s) listed below.
For the parts numbers, adjustments, etc. which are not shown in this manual, refer to the following
B
manual(s).
Model No.
Order No.
CRT2537
XDV-M8106ZT/UC
CX-692
CRT2533
- The supplementary models are identical with the original ones except for the following items.
C
XDV-M8137ZT-91/UC
Description
Polyethylene Bag
Air Cap
Carton
Contain Box(1/2)
Protector
Protector
D
[ Important symbols for good services ]
In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.
When you find the procedures bearing any of the symbols, be sure to fulfill them:
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.
2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable.
In accordance with the procedures or instructions described in this manual, adjustments should be performed.
E
3. Cleaning
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,
proper cleaning should be performed to restore their performances.
4. Shipping mode and shipping screws
To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.
5. Lubricants, glues, and replacement parts
F
Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying
glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the
prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed
ones should be used.
2
1
2
Mech. Module Remarks
MM-1
DVD/CD Mech. Unit:Circuit Description, Mech.Description, Disassembly
Part No.
CEG1181
CEG1288(Non Spare Part)
CHG4170
CHL5166
CHP2341(TOP)
CHP2342(BOTTOM)
XDV-M8137ZT/UC
2
3
3
4
4