Pioneer DV-393-S Panduan Petunjuk Pengoperasian - Halaman 35
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemutar DVD Pioneer DV-393-S. Pioneer DV-393-S 48 halaman. Pioneer operating instruction dvd player dv-393-s dv-490v-s
Juga untuk Pioneer DV-393-S: Panduan Petunjuk Pengoperasian (48 halaman), Panduan Petunjuk Pengoperasian (48 halaman), Panduan Petunjuk Pengoperasian (48 halaman)
Halaman Cetak
Initial Settings menu
Setting
DTS Out
96 kHz PCM Out
MPEG Out
HDMI Out*
* DV-490V only.
Video Output settings
Setting
TV Screen
(This setting effective for
analog and HDMI video
output. See also Screen
sizes and disc formats on
page 41.)
Component Out
Option
DTS
Off
96kHz > 48kHz
96kHz
MPEG > PCM
MPEG
LPCM (2 ch)
Auto
Off
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
Interlace
Progressive
What it means
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not compatible
with DTS audio.)
No digital audio is output when playing a DTS disc.
96 kHz digital audio is converted to 48 kHz for digital output.
96 kHz digital audio is output as is at 96 kHz.
MPEG encoded digital audio is converted to PCM audio for
digital output.
MPEG encoded digital audio is output as is.
Set if your monitor or device only accepts stereo input. On this
setting multichannel audio is downmixed to 2 channels for
stereo linear PCM output.
Dolby Digital, DTS and MPEG sources are processed
according to how they were encoded, and linear PCM sources
are heard as is.
No digital audio output.
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
Set if you have a widescreen TV.
Set if your TV is not compatible with progressive scan video.
Set if your TV is compatible with progressive scan video (see
your TV's instruction manual for details). See also Switching
the video output to interlace using the front panel controls on
page 13.
Note that progressive scan video is only output from the
component video jacks and that there is no output from the
composite jacks when this setting is selected.
07
35
En