Pioneer DV-393-S Panduan Petunjuk Pengoperasian - Halaman 44
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemutar DVD Pioneer DV-393-S. Pioneer DV-393-S 48 halaman. Pioneer operating instruction dvd player dv-393-s dv-490v-s
Juga untuk Pioneer DV-393-S: Panduan Petunjuk Pengoperasian (48 halaman), Panduan Petunjuk Pengoperasian (48 halaman), Panduan Petunjuk Pengoperasian (48 halaman)
Halaman Cetak
08
Additional information
Problem
No HDMI video output
No multichannel HDMI
audio.
A connected DVI
component (with HDCP)
doesn't work with this
player.
Note
• Static electricity or other external influences may cause malfunctioning of this unit. In this
case, unplug the power cord and then plug back in. This will usually reset the unit for proper
operation. If this does not correct the problem, please consult your nearest Pioneer service
center.
Glossary
Analog audio Direct representation of sound by an
electrical signal. See also Digital audio.
Aspect ratio
The width of a TV screen relative to its
height. Conventional TVs are 4:3;
widescreen models are 16:9.
Digital audio Indirect representation of sound using
numbers. See also Sampling frequency
and Analog audio.
44
En
Remedy
• Make sure that you've selected this player as the HDMI input in the
settings for the component you're using. You may need to refer to the
instruction manual of the component to do this.
• Check that the HDMI cable is connected properly and that the cable
isn't damaged.
• Check that components connected using the HDMI interface are
switched on and HDMI compatible.
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, using a DVI connection may result in unreliable
signal transfers.
• Make sure the resolution on this player matches that of the
component you have connected using HDMI. See HDMI Resolution
on page 36 to change the HDMI resolution. See Resetting the output
resolution to the default setting with HDMI connection on page 15 if
you want to reset the output resolution.
• Make sure the HDMI OUT setting is set to Auto (see HDMI Out on
page 35 to do this).
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, using a DVI connection may result in unreliable
signal transfers.
*1
DivX is a compressed digital video
DivX
format created by the DivX
codec from DivX, Inc.
Dolby
A multi-channel audio encoding system
*2
developed by Dolby Laboratories that
Digital
enables far more audio to be stored on a
disc than PCM encoding. See also PCM
(Pulse Code Modulation).
®
video