Pioneer DV-505 Panduan Servis - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Servis untuk Pemutar DVD Pioneer DV-505. Pioneer DV-505 47 halaman. Dvd/video cd/cd player code switchable modification
Juga untuk Pioneer DV-505: Instruksi dan Manual Instalasi (16 halaman)

Pioneer DV-505 Panduan Servis

3. TEST MODE

3.1 HOW TO ENTER THE TEST MODE
There is the three following methods in an enters of the test mode.
1. Short-circuit the terminals (TP6006 and TP6007) for test mode
entry at the side of the system control IC (IC601) of DVDM ASSY,
and turn the power on.
2. Input [ESC] key and [TEST/RANDOM] key of the test mode
remote control unit in order under the power on condition.
3. Connect a personal computer with the RS232C terminal (CN106),
and input entry command (TE) of test mode from the personal
computer.
Note: FL indication and LED come all to light until key operation
is done when entering the test mode.
3.2 RELEASE THE TEST MODE
There is the three following methods in a release of the test mode.
1. Turn the power off.
2. Press [ESC] key of the remote control unit. At this time, reset it
for a while except for during the LD and CDV set.
3. Connect a personal computer with the RS232C terminal (CN106),
and input normal mode entry command (NE) from the personal
computer.
3.3 THE EXPLANATION OF EACH
FUNCTION
The function that can be operated in the test mode is as the following.
Use a LD remote control unit in the test mode.
(1) Door Open/Close
1. Press [REPEAT A-B] (48) key of the remote control unit.
2. Press [OPEN/CLOSE] key of the player from the stop condition.
(2) Stop
1. Press [REPEAT] (44) key of the remote control unit.
2. Press [STOP] key of the remote control unit or the player from
the stop condition.
(3) Play 1 (Demultiplex exist which it tries to output
the playback screen)
1. Press [PLAY] (17) key of the remote control unit.
• CLD rise up at the tracking open condition. However, it becomes
tracking close when entering the test mode during the play.
• DVD rise up at the tracking close. Playback screen may not
appear because the NAVI information isn't read in the test mode.
(4) Play 2 (Demultiplex is absent which performing
trace only)
1. Press [TV/LDP] (0F) key of the remote control unit.
• It is equal to the play 1 with CLD.
• Perform only tracing with DVD, and there are no video and
audio output.
DV-505, DVL-909, DV-S9
(5) Pause
1. It becomes pause condition by pressing [CX] (0E) key of the
remote control unit in the play.
2. Pause ON/OFF changes alternately by pressing [PAUSE] (18)
key in the play.
(6) Search Address Input Entry
It becomes the address input mode when [+10] key (1F) is pressed.
(indication for the most significant digit : > )
Indicate the last address as the initial condition in this time.
Only in case of DVD, addition search (indication for the most
significant digit : + ) and subtraction search (indication for the most
significant digit : – ) are able to select in order by pressing [+10]
key continuously.
The address where input value was added to the present address is
make to search with addition search.
The address where input value was subtracted to the present address
is make to search with subtraction search.
In case of CD is only absolute time search.
Also address clear and release from the address input mode are able
to perform by 2 steps by pressing [CLEAR] (45) key.
(7) Search Address Input
Press [0] to [9] keys of the remote control unit.
Set up the address by the hexadecimal number with DVD.
When [PROGRAM] (4C) key is pressed in the address input mode,
input mode changes to hexadecimal number input (Indicates " "
mark), and [1] to [6] keys are input as [A] to [F].
At this time, [7], [8], [9] and [0] keys are not accepted.
Also the hexadecimal number input and the decimal number input
can be changed with toggle.
(8) Search Practice
1. Press [CHP/TIM] (13) key of the remote control unit.
Practice the on screen no playback (Doesn't demultiplex) after
the search with DVD.
2. Press [PLAY] (17) key of the remote control unit.
Practice the on screen playback (demultiplex exists) after the
search with DVD.
(9) Side Change
This function becomes effective when a set disk is LD.
1. Change a side on the side A from the side B when pressing [SIDE
A] (4D) key of the remote control unit.
2. Change a side on the side B from the side A when pressing [SIDE
B] (4E) key of the remote control unit
(10) Tracking Open
1. Press [STEP FWD] (54) key of the remote control unit in the play
condition.
2. Switch the open/close by pressing [PLAY] key of the remote
control unit or the player during the play (CD only).
13