Pioneer DVJ-X1 - Professional DVD Turntable Panduan Pelatihan - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pelatihan untuk Pemutar DVD Pioneer DVJ-X1 - Professional DVD Turntable. Pioneer DVJ-X1 - Professional DVD Turntable 38 halaman. Dvd video deck
Before Operating (Names and Functions of Parts)
Operation panel
Buttons and controls with the
Buttons and controls with the
1 2
40 41 42
39
38
37
36
35
34
33
32
31
30
29
28
27
1. POWER OFF (—)/ON (_) switch
Located on the rear panel.
2. LOOP IN/REALTIME CUE button/indicator
Real time cue
P.38
Loop-in point input
P.41
3. LOOP OUT/OUT ADJUST button/indicator
Loop-out point input
P.41
Loop-out point adjust
P.41
4. RELOOP/EXIT button
5. EMERGENCY LOOP button
When this button is pressed, the current point is set as a loop-in
point; a loop-out point is set automatically and loop play begins be-
tween the two points.
6. CUE/LOOP CALL button
Press to turn cue point navigation mode ON/OFF.
�
mark are disabled when the mode select switch is set to NORMAL.
mark are disabled when the mode select switch is set to DJ.
3
4 5
6
43 44 45 46
47
26
25
24
23
P.41
P.41
P.45
7
8
9 10
48
49
50
51
52
53
54
11
12
13
14
15
16
17
18
19
22
21
20
14. JOG MODE select button
Each time pressed, sets VINYL mode alternately ON/OFF.
VINYL mode ON: If surface of jog dial is touched during playback,
playback stops, and if the dial is then rotated, image and sound are
output in response to the amount of rotation. (if the angled surface
of the jog dial is rotated without touching the top, pitch bend opera-
tion is enabled.)
¶ The current jog mode is memorized even when power is turned
off.
VINYL mode OFF: The above operations are disabled even when
the jog dial's surface is touched.
15. VINYL mode indicator
Lights when the jog mode is set to VINYL mode.
16. TEMPO control range select button
Each time this button is pressed, the TEMPO control slider's vari-
able range changes (±6%, ±10%, ±16%, WIDE).
When WIDE is selected, the variable range is +70 to –100% for DVD
playback, and ±100% for CD playback.
7
7. STOP button
Stops disc playback. When the eject/stop mode
select switch is set to LOCK, playback will not
stop unless the PAUSE mode is set first.
8. Eject/stop mode select switch
(UNLOCK/LOCK)
UNLOCK: If the EJECT (0) button is pressed
during playback, the disc stops and is ejected.
If the STOP button is pressed during playback,
the disc playback stops.
LOCK: If the EJECT (0) button is pressed dur-
ing playback, the disc will not be ejected. To
eject the disc, set the unit to pause, then press
the EJECT (0) button. Likewise, playback will
not stop if the STOP button is pressed during
playback; to stop disc playback, set the unit to
pause, then press the STOP button.
9. EJECT (0) button
When this button is pressed, disc rotation stops
and the disc is ejected from the loading slot. If
the eject/stop mode select switch is set to the
LOCK position, the disc will not be ejected un-
less the unit is set to pause before pressing the
EJECT (0) button (
P.34).
10. Mode select switch
(MODE NORMAL/DJ)
Located on the rear panel.
11. TOUCH/BRAKE response dial
Adjusts the disc deceleration speed (time to
playback stop) when the jog dial's top surface
is touched with jog mode set to VINYL ON. Ro-
tate the dial counterclockwise to stop playback
quickly, and rotate dial clockwise to cause
slower deceleration.
12. RELEASE/START response dial
Adjusts the disc acceleration speed (playback
startup time) when the jog dial's top surface is
released with jog mode set to VINYL ON. Ro-
tate the dial counterclockwise to restart play-
back quickly, and rotate dial clockwise to cause
slower acceleration.
13. HYPERJOG MODE button/indicator
When hyper jog mode is set to ON with jog mode
set to VINYL ON, turning the jog dial causes the
rate of change of image and sound to increase
to 2x the rate of changed normally produced
(when the hyper jog mode is OFF).
P.11