Pioneer KRP-S03 Panduan Petunjuk Pengoperasian - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem Pembicara Pioneer KRP-S03. Pioneer KRP-S03 50 halaman.
Halaman Cetak
INSTALLATION ON THE FLAT SCREEN TV
Flat screen TV with the speaker installed
Speaker bracket
(for TOP-Right)
Speaker mounting
screw (M5 × 10 mm)
Speaker
Speaker bracket
(for BOTTOM-Right)
Speaker mounting
screw (M5 × 10 mm)
*: Accessories of the flat screen TV
When using the table top stand:
NOTE:
Before attaching the speaker, please attach the KRP-TS02/KRP-SW01 series table top stand to the flat screen TV.
1. Attaching the Speaker Brackets and Padding strips to the Speakers.
There are top and bottom speaker brackets for both the left and the right speaker. Attach the appropriate brackets to the top
and the bottom on the back of the speakers using the supplied screws.
(It shows the attachment of the bracket on the right side. It is attached on the left side by the same procedure.)
Screw holes
Screw holes
Speaker bracket
(For BOTTOM-Right)
Speaker mounting
screw (M5 × 10 mm)
Speaker mounting
screw (M5 × 10 mm)
Speaker cable
Cable clamp*
Speaker bracket
(For TOP-Right)
Place the speaker so its terminals
(bottom) are facing you.
Speaker mounting
screw (M5 × 10 mm)
Speaker mounting
screw (M5 × 10 mm)
Cable clamp*
Remove the paper liner
on the back of the
padding strip and
attach the padding strip
1 mm below the top
side of the speaker.
Do not pull the padding strip hard.
Doing so may stretch it.
If the padding strip is too long, cut it.
Padding strip
English
Speaker bracket
(for TOP-Left)
Speaker mounting
screw (M5 × 10 mm)
Speaker
Speaker bracket
(for BOTTOM-Left)
Speaker mounting
screw (M5 × 10 mm)
1 mm
3