Pioneer S-FCW4550 Panduan Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem Pembicara Pioneer S-FCW4550. Pioneer S-FCW4550 16 halaman. Home theater loudspeaker system

Halaman Cetak

3. Secure the speaker to the speaker stand with the screws

provided.

Using two large screws for each speaker stand, secure the

speaker to the speaker stand as shown in the illustration below.

4. After you have finished, refer to the other side of this

sheet for the speaker setup options available with this

system.

PLACEMENT AND FINE TUNING

SUBWOOFER

Sound spreads in all directions in the very low frequency

range.Human hearing cannot easily detect the source of very

low frequencies. Be sure to provide a space of at least 8

inches (20cm) between the rear of the subwoofer and the

nearest wall.

FRONT SPEAKERS

For best results the loudspeaker should be positioned near ear

level and the loudspeakers separated a distance approximately

equal to the listening distance.

inward towards the listener will improve the image stability for

non-central listeners. Close proximity to a side or rear wall will

enhance the midbass performance, although too close

(particularly a corner location) and the bass may be unnaturally

high and image performance may be degraded.

CENTER SPEAKER

The loudspeaker should be positioned below the TV. For best

results align the front of the loudspeaker with the front

of the TV. If the loudspeaker is placed under the TV and very

close to the floor, then tilting upwards may be beneficial.

SURROUND SPEAKERS

For best results the loudspeakers should be positioned at or

above ear level. Depending upon your room layout and

preferences, the left and right rear speakers should be

positioned on the side walls just the rear of the listening

position, or on the walls. Place the rear center speaker directly

behind the listening position for best performance.

Angling the loudspeakers

Standard surround 5-spot setup (S-FCRW4500 only)

This is a standard multichannel surround soundspeaker setup

for optimal 5.1 channel home theatre sound.

Center

Front left

Listening position

Surround

left

1. Detach the surround speakers from the front speakers.

To remove, turn the surround speaker so that the

base lines up with the DETACH POSITION (%) on the top of the

front speaker. Once aligned, the surround speaker can be

removed easily by gently lifting it upwards.

Caution

To prevent accidents when in use, make sure the surround

speaker is secure by turning it so the

speaker is not in the UNLOCK AREA.

2. Attach the front speaker covers and surround speaker bases.

Line up the holes with the spurs on the cover or base as shown

below. Press in firmly.

3. Attach the non-slip pads to the base of each of the center

and surround speakers.

Use the adhesive to attach 4 pads to the base of each speaker.

www.pioneerelectronics.com

Front right

Subwoofer

Surround

right

arrow at its

arrow at the base of the

5ch STEREO