Cruza XR500 Panduan Pemilik - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Skuter Cruza XR500. Cruza XR500 15 halaman. Electric power scooters
Juga untuk Cruza XR500: Panduan Pengguna (14 halaman)

Halaman Cetak

Riding

Make sure that all of the exposed bolts and screws are

tightened.

2. Raise the kickstand to its upright position.

Push the on/off switch (located on the left handlebar) to the ON

position.

4. Put one foot on the deck of the XR500 while pushing off with the other foot; gently

rotate the THROTTLE GRIP, on the right side of the handlebars. The XR500 will

begin to move on its own power.

**Your scooter has a variable speed hand throttle.

scooter by the amount of pressure you use when rotating the hand throttle. The more

you rotate, the faster you will go.

Stopping/Braking

To brake, release the THROTTLE GRIP and depress the BRAKE LEVERS (on

the left/right side of the handlebars. Depressing the brake will disengage power to

the motor.

When the unit feels like it is losing power or not accelerating to full

speed, the scooter is ready to be re-charged.

NOTE:

If the on/off switch is left in the ON position for more than 10-15 minutes

without moving, Smart Power will shut itself OFF. To reset, turn the unit OFF, wait a few

seconds and then switch it back ON again.

Folding & Storage

When you are done riding the XR500 you can fold it down for compact storage and

transportation. To fold down the XR500, use one hand to push down on the folding

handle while gently pushing down on the handlebars. BE CAREFUL NOT TO HIT

YOUR HEAD WITH THE HANDLEBAR. Push down until you feel the mechanism lock

into the down position.

BRAKING SYSTEM

The XR500 uses a pinch braking system for the front, and a disc/caliper system

for the rear. They are both activated by a hand brake lever on the left and right

side of the handlebar. Squeezing the hand brake lever with your left hand

activates the rear brake. Squeezing the hand brake lever with your right hand

activates the front brake. Make sure to release the HAND THROTTLE GRIP

when engaging the brakes.

Practice braking on a smooth, dry surface to get used to the feel of the braking

system. Braking distance is affected by wet conditions and loose and uneven

riding surfaces.

Adjusting the Brakes

The Brakes on the XR500 should come fully adjusted from the factory.

You can control the speed of your

Page