3Com Etherlink 3C905B-TX Panduan Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Kartu Jaringan 3Com Etherlink 3C905B-TX. 3Com Etherlink 3C905B-TX 12 halaman. Etherlink pci network interface cards
Juga untuk 3Com Etherlink 3C905B-TX: Panduan Cepat (15 halaman), Panduan Cepat (12 halaman)

Halaman Cetak

In most PCs, slot 1 and 2 are bus mastering slots. Use slot 1

if possible with the 3C905B-TX NIC. If you have a video PCI

card, install it in the last slot (the one farthest from slot 1).

6 Unscrew the screw holding the PCI slot's backplate

and remove it.

7 Insert the 3C905B-TX NIC into an empty PCI slot,

shown in Figure 2.

Make sure that the NIC is ﬁrmly seated in the slot.

Figure 2 Inserting the NIC

8 Secure the NIC with the screw you removed earlier.

To install the Remote Wake-Up connector, see the

user guide.

9 Replace the PC cover and reconnect all previously

connected cables.

10 Turn on the power to the PC.

11 Proceed to the next section, "Connecting to the

Network."

Installing the 3C905B-TX NIC

Screw

3C905B-TX NIC

PCI slot