Aeotec GP-AEOWLSAU Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Aeotec GP-AEOWLSAU. Aeotec GP-AEOWLSAU 3 halaman. Water leak sensor
Halaman Cetak
Connect the Aeotec Water Leak Sensor
Video link:
https://youtu.be/LPrqfh9xFA0
Steps in SmartThings Connect
1. From the Home screen, tap the Plus (+) icon and select Device.
2. Select Aeotec and then Water Leak Sensor (IM6001-WLP).
3. Tap Start.
4. Choose a Hub for the device.
5. Choose a Room for the device and tap Next.
6. While the Hub searches:
•
Pull the "Remove when Connecting" tab found in the sensor.
•
Scan the code on the back of the device.
Using Aeotec Water Leak Sensor
Aeotec Water Leak Sensor is now a part of your Aeotec Smart Home Hub network. It will appear
as a water sensor widget that can display leak status or temperature sensor readings.
This section will go over how to display all information in your SmartThings Connect app.
Steps in SmartThings Connect.
1. Open SmartThings Connect
2. Scroll down to your Aeotec Water Leak Sensor
3. Then tap Aeotec Water Leak Sensor widget.
4.
On this screen, it should display:
•
Water leak
•
Temperature
You may use water and temperature sensor in an Automation to control your Aeotec Smart Home
automation network.
How to remove Aeotec Water Leak Sensor from
Aeotec Smart Home Hub
If your Aeotec Water Leak Sensor is not performing as you expected, you'll likely need to reset your
water leak sensor and remove it from Aeotec Smart Home Hub to begin a fresh start.
Steps
1. From the Home screen, select Menu
2. Select More Options (3 dot icon)
3. Tap Edit
4. Tap Delete to confirm