DINGO Wacker Neuson SM325-27T Panduan Pengoperasian & Pemeliharaan - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengoperasian & Pemeliharaan untuk Pemuat Ringkas DINGO Wacker Neuson SM325-27T. DINGO Wacker Neuson SM325-27T 20 halaman. Mini loader
Halaman Cetak
NOTE: if the engine has been working hard or is hot, let it idle for a minute before turning
the ignition key to off. This helps cool the engine before it is stopped. In an emergency,
turning the ignition key to off will stop the engine.
Stopping the Machine
Park on firm, level ground, move the auxiliary hydraulics lever to neutral, the throttle to idle,
lower the load frame to the ground, turn the ignition key to off, remove the key, and chock
the wheels.
Caution: Remove the key from the ignition while the machine is unattended to avoid
unauthorised and unsafe use.
Moving a Non Functioning Machine
The best way to move a non-functioning machine is by forklift or crane. It is also possible to
push or tow a machine slowly over a short distance without the use of the engine if required.
Contact your Authorised Wacker Neuson Dingo Dealer for more information.
Using Cylinder Locks
Important: Normal maintenance should be completed with the load frame fully lowered. If
maintenance or repairs requires the load frame to be raised, use the cylinder lock provided.
Warning:
The load
frame may lower when in the raised position. To avoid this hazard always
install cylinder locks or safety stand, available through your Authorised Wacker Neuson
Dingo Dealer.
Page 13 of 20
Item – Rev(s): 9200000310 & 9200000320 – 102