Ariston HS PREMIUM Petunjuk Teknis - Halaman 4
Jelajahi secara online atau unduh pdf Petunjuk Teknis untuk Pemanas Air Ariston HS PREMIUM. Ariston HS PREMIUM 32 halaman. Condensing wall thermal power plant
Halaman Cetak
Machine Translated by Google
GENERAL
SAFETY RULES
Legend symbols:
Failure to follow the warning instructions presents
a risk of injury to persons, even in certain fatal
circumstances.
Failure to follow the warning indicates the
risk of causing damage, in certain very
serious circumstances, to objects, plants
and animals.
Install the appliance on a solid, non-vibrating
wall.
Noise during operation
Do not damage when drilling the existing
wall, electrical cables or pipes.
Electric shock on contact with live
conductors. Explosions, fires or poisoning
due to gas leaks through damaged pipes.
Damage to existing installations. Floods
due to water leaks through damaged pipes.
Make the electrical connections with
conductors of suitable section.
Fire due to overheating due to the passage
of electricity in undersized cables.
Protect pipes and connecting cables to
prevent damage to them.
Electric shock on contact with live
conductors. Explosions, fires or poisoning
due to gas leaks through damaged pipes.
Damage to existing installations. Floods
due to water leaks through damaged pipes.
Make sure that the installation environment
and the installations to which the appliance
is to be connected comply with the
applicable regulations.
Electric shock on contact with live
conductors, incorrectly installed.
Damage to the appliance due to improper
operating conditions.
Use hand tools and appliances suitable
for use (especially make sure that the tool
is not damaged and that the handle is fully
and correctly fixed), use them correctly,
make sure that they do not fall from a
height, after use put put them in their place.
Injuries due to splinter or fragment
projections, dust inhalation, bumps, cuts,
punctures, scratches.
4 /
Damage to the device or objects around it
due to the design of splinters, bumps, cuts.
Use suitable electrical appliances (especially
make sure that the socket and the power
cord are intact and that the parts with a
rotary or reciprocating motor are
properly secured), use them correctly, do
not cross the pipes with the power cord,
make sure they do not fall from a height,
disconnect them and replace them after use.
Injuries due to splinter or fragment
projections, dust inhalation, bumps, cuts,
punctures, scratches, noise, vibration.
Damage to the device or objects around it
due to the design of splinters, bumps, cuts.
Make sure that the portable ladders are well
supported (stable), that they are sturdy, that
the steps are full and non-slip, that they will
not be moved with them, that someone is
supervising them.
Injuries due to falls from a height or due to
cuts (double stairs).
Make sure that the castle stairs are well
supported (stable), sturdy, that the steps
are complete and non-slip, that they have
railings along the ramp and parapets on the
platform.
Injuries due to falls from a height.
Make sure that in the case of work at a
certain height (generally more than two
meters above the level), support bars
(parapets) have been provided in the work
area or individual safety belts capable of
preventing the fall, that in the space there
are no dangerous obstacles to a possible
fall, as the impact will be attenuated by semi-
rigid or deformable stopping surfaces.
Injuries due to falls from a height.
Make sure that the workplace has
adequate hygienic and sanitary conditions
in terms of lighting, ventilation, solidity.
Injuries caused by bumps, obstructions, etc.
Protect the machine and areas near the
workplace with suitable material.
Damage to the device or objects around it
due to splinter design,