Ariston HW80/9H Buku Petunjuk - Halaman 16

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemanas Air Ariston HW80/9H. Ariston HW80/9H 39 halaman.

8.5 Standard Mode

Activate this mode under the instruction described in 8.2 and the system will heat the water

according to its real-time temperature to activate heating pump mode as the priority. When heating

pump reaches suitable temperature the ordinary heating mode will be activated.

Activate this mode under the instruction described in 8.2 and the sleep icon will light up with the

days it is set to be kept in sleep mode while other icons are in dark. Press +/- button to select days

(from 1 to 7) you want the system to be kept in sleep mode. After that, press setting button or don't

press any button for 5 seconds then the system will automatically activate sleep mode and display

the days it's set to be kept in sleep mode. Once this mode is activated, you can press +/- button to

select days you want the system to be kept in sleep mode while other buttons are not available.

Press switch button for a long time then the system will quit sleep mode and get back to the mode it

was running.

8.7 Water Quantity Display

Under the mode of timing, night and standard, when heating pipe or heating pump is working, then

the indicator at the right of the panel will flash back and forth to indicate how much hot water there

is in the tank and the fact that the system is working. When heating pipe and heating pump are not

working, then the indicator only indicate how much hot water there is in the tank rather than

flashing back and forth.

Note:

* Under the above operation modes, if you don't press any button the background will go dark after

30 seconds. If you press any button at that time, the background will light up again and display "set

temperature and actual temperature" and "current time" alternatively every 4 seconds.

* Under the above operation modes, when heating pump is in operation, its indicator will light up

and it's the same with heating pipe.

* Under the mode of timing, night and standard, when heating pipe or heating pump is working,

then the indicator at the right of the panel will flash back and forth to indicate how much hot water

there is in the tank and the fact that the system is working. When heating pipe and heating pump

are not working, then the indicator only indicate how much hot water there is in the tank rather

than flashing back and forth.