Ariston HW80/9H Buku Petunjuk - Halaman 8

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemanas Air Ariston HW80/9H. Ariston HW80/9H 39 halaman.

3. Warning

According to certain national standard, there are some limitations of installing water heater in the

bathroom.

Ariston Thermo Group (China) Co., Ltd. bears no responsibility for damages result from user's

installation and operation which are against instructions of this manual. Product installation must

be implemented by technicians authorized or certified by Ariston and we don't bear any

responsibility in the process of the installation carried by users themselves.

It is more than necessary to pay attention to the following issues:

·Must use original safety valve which is attached to product package.

·Product package must be intact and not replaced by other parts.

·Product installation must be implemented by technicians authorized or certified by Ariston and

expansion bolts must be fastened.

·Make sure that power supply voltage is the same with that on product tag and that ammeter, outlet

(16A outlet) and cable diameter (related with 16A outlet) are in conformity with product's rated

current.

·According to national standard, check for grounding condition, outlet must be connected with

earth wire which is totally separated with neutral wire. It

strictly prohibited of using water heater without reliable

grounding condition.

·Do not use any electricity adapter and extension cable to

adapt to water heater's plug or use any other plug to

adapt to its outlet. Please do not use terminal board

(figure d and e).

·Water heater should be separately connected to the

circuit where there is no other electric appliance.

·Water heater and outlet should be installed at a dry

place where is free from water.

·Line cord used by this product is specially designed, if

there's any damage it could only be changed by

technicians authorized or certified by Ariston.

·If user's in-house power supply does not meet the

standard requirement then it's suggested that an

independent leakage protector should be installed into

water heater's loop.