Aeotec ZW089 Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Aksesori Aeotec ZW089. Aeotec ZW089 2 halaman. Recessed door sensor gen5

Halaman Cetak

If you're using a Z-Stick:

If you're using a Minimote:

Remove

Action Button

1. If your Z-Stick is plugged into a gateway or a

computer, unplug it.

1. Take your Minimote to your Recessed Door

2. Take your Z-Stick to your Recessed Door

Sensor.

Sensor. Hold the Action Button on your Z-Stick

2. Press the Remove button on your Minimote.

for 3 seconds.

3. Press the Z-Wave Button on your sensor with

3. Press the Z-Wave Button on your sensor

a small pin or toothpick.

with a small pin or toothpick.

4. If your Recessed Door Sensor has been

4. If your sensor has been successfully removed

successfully removed from your network,

from your network, its LED light will blink for

its LED light will blink for 3 seconds when

3 seconds when you press the Z-Wave Button.

you press the Z-Wave Button. If the removal

If the removal was unsuccessful, its LED light

was unsuccessful, its LED light will remain

will remain illuminated for 3 seconds.

illuminated for 3 seconds.

5. Press the Action Button on your Z-Stick to

5. Press any button on your Minimote to take it

take it out of removal mode.

out of removal mode.

Reset your sensor.

the manifestation of a problem. Aeon Labs' sole

obligation under the foregoing warranty is, at

At some stage, you may wish to reset all of

Aeon Labs' option, to repair, replace or correct

your Recessed Door Sensor's settings to their

any such defect that was present at the time

factory defaults. To do this, press and hold the

of delivery, or to remove the Products and to

Action Button for 20 seconds and then release

refund the purchase price to Customer.

it. Your sensor will now be reset to its original

The "Warranty Period" begins on the date the

settings.

Products is delivered and continues for 12

months.

Technical specifications.

Any repairs under this warranty must be

conducted by an authorized Aeon Labs service

Operating distance: Up to 300feet/100metres

representative and under Aeon Labs' RMA

outdoors.

policy. Any repairs conducted by unauthorized

Battery: Lithium cell CR2, 3 volt battery, 800mAh.

persons shall void this warranty.

Operating temperature: -10

to 50 .

Relative humidity: 8% to 80%.

Excluded from the warranty are problems

due to accidents, acts of God, civil or military

Warranty.

authority, civil disturbance, war, strikes, fires,

other catastrophes, misuse, misapplication,

Aeon Labs warrants to the original purchaser

storage damage, negligence, electrical power

of Products that for the Warranty Period (as

problems, or modification to the Products or its

defined below), the Products will be free from

components.

material defects in materials and workmanship.

Aeon Labs does not authorize any person

The foregoing warranty is subject to the proper

or party to assume or create for it any other

installation, operation and maintenance of

obligation or liability in connection with the

the Products in accordance with installation

Products except as set forth herein.

instructions and the operating manual supplied

Aeon Labs will pass on to Customer all

to Customer. Warranty claims must be made

manufacturers' Material warranties to the extent

by Customer in writing within thirty (30) days of

that they are transferable, but will not

trademark, mask work, copyright, trade secret

independently warrant any Material.

or any actual or alleged violation of any other

intellectual property rights arising from or in

C u s t o m e r m u s t p r e p a y s h i p p i n g a n d

connection with the products, except to the

transportation charges for returned Products,

extent that such infringement exists as a result

and insure the shipment or accept the risk of

of Aeon Labs' manufacturing processes.

loss or damage during such shipment and

transportation. Aeon Labs will ship the repaired

IN NO EVENT SHALL AEON LABS BE LIABLE FOR

ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR

or replacement products to Customer freight

CONSEQUENTIAL DAMAGES, OR DAMAGES FOR

prepaid.

LOSS OF PROFITS, REVENUE, OR USE INCURRED

Customer shall indemnify, defend, and

BY CUSTOMER OR ANY THIRD PARTY, WHETHER

IN AN ACTION IN CONTRACT, OR TORT, OR

hold Aeon Labs and Aeon Labs' affiliates,

OTHERWISE EVEN IF ADVISED OF THE POSSIBILITY

shareholders, directors, officers, employees,

OF SUCH DAMAGES. AEON LABS' LIABILITY AND

contractors, agents and other representatives

CUSTOMER'S EXCLUSIVE REMEDY FOR ANY

harmless from all demands, claims, actions,

CAUSE OF ACTION ARISING IN CONNECTION WITH

causes of action, proceedings, suits,

THIS AGREEMENT OR THE SALE OR USE OF THE

PRODUCTS, WHETHER BASED ON NEGLIGENCE,

assessments, losses, damages, liabilities,

STRICT LIABILITY, BREACH OF WARRANTY,

settlements, judgments, fines, penalties,

B R E A C H O F A G R E E M E N T, O R E Q U I TA B L E

interest, costs and expenses (including fees

PRINCIPLES, IS EXPRESSLY LIMITED TO, AT AEON

and disbursements of counsel) of every kind (i)

LABS' OPTION, REPLACEMENT OF, OR REPAYMENT

based upon personal injury or death or injury

OF THE PURCHASE PRICE FOR THAT PORTION OF

to property to the extent any of the foregoing

PRODUCTS WITH RESPECT TO WHICH DAMAGES

ARE CLAIMED. ALL CLAIMS OF ANY KIND ARISING

is proximately caused either by a defective

IN CONNECTION WITH THIS AGREEMENT OR THE

product (including strict liability in tort) or

SALE OR USE OF PRODUCTS SHALL BE DEEMED

by the negligent or willful acts or omissions

WAIVED UNLESS MADE IN WRITING WITHIN THIRTY

of Customer or its officers, employees,

(30) DAYS FROM AEON LABS'S DELIVERY, OR THE

subcontractors or agents, and/or (ii) arising

DATE FIXED FOR DELIVERY IN THE EVENT OF

NONDELIVERY.

from or relating to any actual or alleged

infringement or misappropriation of any patent,

THE INDEMNITY AND WARRANTY IN ABOVE

interference in a residential installation.

ARE EXCLUSIVE AND IN LIEU OF ALL OTHER

This equipment generates, uses and

INDEMNITIES OR WARRANTIES, WHETHER

can radiate radio frequency energy and,

EXPRESS OR IMPLIED, INCLUDING THE IMPLIED

if not installed and used in accordance

WARRANTIES OF MERCHANTABILITY AND FITNESS

with the instructions, may cause harmful

FOR A PARTICULAR PURPOSE.

interference to radio communications.

FCC NOTICE (for USA)

However, there is no guarantee that

THE MANUFACTURER IS NOT RESPONSIBLE

interference will not occur in a particular

FOR ANY RADIO OR TV INTERFERENCE CAUSED

installation. If this equipment does cause

BY UNAUTHORIZED MODIFICATIONS TO THIS

harmful interference to radio or television

EQUIPMENT.SUCH MODIFICATIONS COULD

reception, which can be determined by

VOID THE USER'S AUTHORITY TO OPERATE THE

turning the equipment off and on, the

EQUIPMENT.

user is encouraged to try to correct the

STORE INDOORS WHEN NOT IN USE. SUITABLE

FOR DRY LOCATIONS. DO NOT IMMERSE IN

interference by one or more of the following

WAT E R . N O T F O R U S E W H E R E D I R E C T LY

measures:

EXPOSED TO WATER.

Reorient or relocate the receiving antenna.

This device complies with Part 15 of the FCC

Increase the separation between the

Rules. Operation is subject to the following two

equipment and receiver.

conditions:

Connect the equipment into an outlet on

This device may not cause harmful

a circuit different from that to which the

interference, and

receiver is connected.

This device must accept any interference

Consul the dealer or an experienced

received, including interference that may

radio/TV technician for help.

cause undesired operation. This equipment

has been tested and found to comply

with the limits for a Class B digital device,

Warning

pursuant to part 15 of the FCC Rules.

Do not dispose of electrical appliances as

These limits are designed to provide

unsorted municipal waste, use separate

reasonable protection against harmful

collection facilities.

Contact your local government for information

regarding the collection systems available.

Certifications (regional):

Z-Wave and Z-Wave Plus are

registered trademarks of Sigma

Designs and its subsidiaries in the

United States and other countries

Version:501008900001-AA