Aeotec Smart Switch 7 Manual - Halaman 18
Jelajahi secara online atau unduh pdf Manual untuk Beralih Aeotec Smart Switch 7. Aeotec Smart Switch 7 18 halaman.
Juga untuk Aeotec Smart Switch 7: Panduan Pengguna (8 halaman), Manual (6 halaman)
Halaman Cetak
7
6
Value1: Enable Hour
Value2: Enable Minute
Value3: Disable Hour
Value4: Disable Minute
Enable Hour:
Valid value are 0-23 and 127. Value 127 means use last valid setting.
Enable Minute:
Valid value are 0-59 and 255. Value 255 means use last valid setting.
Disable Hour:
Valid value are 0-23 and 255. Value 255 means use last valid setting.
Disable Minute:
Valid value are 0-59 and 255. Value 255 means use last valid setting.
Example:
If you want to set Night Light Mode to be enable at 19:00 at night and disable at
07:30 in the morning, you just need to configure:
Value1=0x13, Value2=0x00, Value3=0x07, Value4=0 x1E.
0x5B(91)
Threshold Power (W) for inducing automatic report.
Value
Description
0
Disable
1..2300 1-2300W
0x5C(92)
Threshold Power Consumption (kWh) for inducing automatic report.
Value
Description
0
Disable
1..10000 1-10000kWh
0x5D(93)
Threshold Current (A) for inducing automatic report.
Value
Description
0
Disable
1..100
0.1-10A. Unit is 0.1A.
0x65(101) Configure which meter reading will be periodically report via Lifeline.
7
6
Reserved
Reserved
Reserved
Reserved
The format of the parameter is Bit field (Checkboxes). The parameter MUST be
treated as a bit field where each individual bit can be set or reset. A graphical
configuration tool SHOULD present this parameter as a series of checkboxes.
Note:
The sending frequency is related to Configuration Parameter 0x6F (111).
0x6F(111) Configure the sending frequency of Meter Report .
Value
0
600..2592000 600-2592000s. (10minute-30day)
0xFF(255) Factory Reset or Initialization (Write Only)
Value
1431655765
(0x55555555)
Other
AEOTEC Engineering Specification
5
4
5
4
3
Current
Description
Disable
Description
Factory Reset:
Restore the product to factory settings and remove from the
network.
Initialization:
Initialize all configuration parameters to default values.
3
2
1
2
1
Voltage
Power
Page 13
0
WR
0
WR
0
WR
0
WR
0x0000000F 4
0
Power
Consumption
WR
0x00000258
(600s)
W
-
2
2
1
4
4