Dini Argeo HLD Series Panduan Pengoperasian - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Timbangan Dini Argeo HLD Series. Dini Argeo HLD Series 13 halaman. Laboratory scale, industrial weighing systems

Halaman Cetak

8. SERIAL OUTPUT

Specifications
RS-232 output for the transmission of the weight data
ASCII code
Baud 4800 (selectable from 600 - 9600)
Connector:
9 pin (female)
Pin 2:
RECEPTION
Pin 3:
TRANSMISSION
Pin 5:
GND

8.1 TRANSMISSION MODES

The transmitted data format varies depending on the selected transmission mode (see section 7.4).
P Prt and P Auto
Totalisation Mode
In the normal weighing operations when one is accumulating the weight the data format is the following:
When the totals are recalled from the storage the data format is the following:
Counting Mode
In the counting operations when the PRINT/M+ key is pressed the data format is the following:
Percentage Mode
In the percentage operations when the PRINT/M+ key is pressed the data format is the following:
Progressive of totalisations
GS for gross weight, NT for net weight
<CR><LF>
<CR><LF>
Progressive of totalisations
Total net weight
<CR><LF>
<CR><LF>
Number of pieces
Average piece weight
GS for gross weight, NT for net weight
<CR><LF>
<CR><LF>
Percentage of weight
<CR><LF>
13