Aeotec NanoMote One Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Otomatisasi Rumah Aeotec NanoMote One. Aeotec NanoMote One 10 halaman.

TIP:

If you want your NanoMote to be a security device that use secure/encrypted

message to communicate in a Z-Wave network, then a security enabled Z-Wave

controller is

Ⅳ. Z-WAVE NETWORK EXCLUSION

To remove the

NanoMote

1. Insert the LIR2450 battery.

2. Place the device within the direct range of your Z-Wave controller.

3. Set the main controller remove mode (see the controller's manual).

4. Double click the button quickly, the LED indicator should blink fast.

5. Wait for the removing process to end.

6. Successful adding will be confirmed by the Z-Wave controller's message.

V .Security features of NanoMote One in Z-Wave network

7. The following is a list of supported command classes:

8. 1.The node info frame supports:

COMMAND_CLASS_ZWAVEPLUS_INFO

COMMAND_CLASS_SECURITY

COMMAND_CLASS_SECURITY_2

COMMAND_CLASS_TRANSPORT_SERVICE

2. Security Command Supported Report Frame:

COMMAND_CLASS_VERSION

COMMAND_CLASS_MANUFACTURER_SPECIFIC

COMMAND_CLASS_ASSOCIATION_GRP_INFO

COMMAND_CLASS_ASSOCIATION

COMMAND_CLASS_BATTERY

COMMAND_CLASS_WAKE_UP

COMMAND_CLASS_POWERLEVEL

COMMAND_CLASS_CONFIGURATION

COMMAND_CLASS_SUPERVISION

COMMAND_CLASS_FIRMWARE_UPDATE_MD

COMMAND_CLASS_DEVICE_RESET_LOCALLY

COMMAND_CLASS_CENTRAL_SCENE

COMMAND_CLASS_MARK

COMMAND_CLASS_SWITCH_MULTILEVEL

VI. LOW BATTERY ALARM FUNCTION

NanoMote One will send battery report to the lifeline group when button is triggered during the

sleep mode. If the battery level of the NanoMote One is less than 20%, the NanoMote One will

needed.

from the Z-Wave network: