Aeotec NanoMote One Panduan Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Otomatisasi Rumah Aeotec NanoMote One. Aeotec NanoMote One 10 halaman.

accessed from main controllers configuration interface.

Parameter No.32 Level of low battery

Available settings: 10-50 (10% - 50%)

Default setting: 20 (20%)

Parameter size: 1[byte]

Parameter No.41 Enable send central scene notification.

0 - Disable.

1 – Enable.

Default setting: 1

Parameter size: 1[byte]

Parameter No.42 Setting the duration value of the command switch multilevel.

Available settings: 0-255

Default setting: 255

Parameter size: 1[byte]

Parameter No.43 Enable/disable the buzzer alarm when battery is running low.

0 - Disable.

1 –Enable.

Default setting: 0

Parameter size: 1[byte]

XV. NOTES FOR OTA

With reference to Wake-up operation (VI.WAKE UP) and Z-Wave controller's guidances to do OTA.

XVI. FCC NOTICE (for USA)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications or change to this equipment. Such modifications or change could void the user's

authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection