Ariston microSYSTEM 10 RFFI Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Ketel uap Ariston microSYSTEM 10 RFFI. Ariston microSYSTEM 10 RFFI 16 halaman. Type c boilers
Juga untuk Ariston microSYSTEM 10 RFFI: Petunjuk Servis (24 halaman), Panduan Petunjuk Instalasi (20 halaman)
Halaman Cetak
H
EL PFUL
T o get the most out of your boiler, we have
provided you with some useful advice on
proper use and maintenance:
- Periodically check the system pressure
using the pressure gauge "J", make sure
that the pressure is between 1.0 and 1.5
bar (the blue part on the gauge) when the
system is off and cool. Consult your installer
for checking and refilling the system if the
pressure value is under 1.0 bar.
J
UT013Af
8
S
UGGESTIONS
- The outer panels of the units case must
only be cleaned with a damp cloth. Do
not use abrasive cleaners. The control
panel can be wiped with either a damp
or dry cloth. Spray polishes must not be
used on the control panel surface or
knobs. Care must be taken in preventing
any liquid entering the appliance.
P
RACTICAL TIPS
- If the water is very hard, it is
recommended that a scale reducer be
added to the system so as to reduce the
formation of limescale in the boiler heat
exchanger. This will ensure that the
efficiency of the unit remains the same
over time, reducing gas consumption