Aeotec Siren Gen5 Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem Keamanan Aeotec Siren Gen5. Aeotec Siren Gen5 6 halaman.

If you're using a Z-Stick:

1. Decide on where you want your Siren to be placed and plug it in to a wall outlet. Its

Network LED will begin to blink for 3 seconds when you short press and quickly

release the Action Button.

2. If your Z-Stick is plugged into a gateway or a computer, unplug it.

3. Take your Z-Stick to your Siren.

4. Press the Action Button on your Z-Stick.

5. If Siren has been successfully linked to your Z-Wave network its Network LED will no

longer blink when you short press and quickly release the Action button on Siren. If

the linking was unsuccessful and the Network LED continues to blink when you short

press and quickly release the Action button, repeat the above steps. Press the Action

Button on the Z-Stick to take it out of installationmode and return it to your gateway

or computer.

If you're using a Minimote:

1. Decide on where you want your Siren to be placed and plug it in to a wall socket. Its

Network LED will begin to blink for 3 seconds when you short press and quickly

release the Action Button.

2. Take your Minimote to your Siren.

Intin Manual

ENG