Ariston BDR 190 NA Buklet Perawatan, Penggunaan, dan Pemasangan - Halaman 2

Jelajahi secara online atau unduh pdf Buklet Perawatan, Penggunaan, dan Pemasangan untuk Kulkas Ariston BDR 190 NA. Ariston BDR 190 NA 10 halaman. Ariston bdr190na: user guide
Juga untuk Ariston BDR 190 NA: Dimensi (2 halaman), Buklet Perawatan, Penggunaan, dan Pemasangan (32 halaman), Buklet Perawatan, Penggunaan, dan Pemasangan (32 halaman)

Halaman Cetak

Ariston BDR 190 NA Buklet Perawatan, Penggunaan, dan Pemasangan

Installation

! Before placing your new appliance into operation

please read these operating instructions carefully.

They contain important information for safe use, for

installation and for care of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to new owners of the

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free

room.

2. Do not obstruct the rear fan grills. The compressor

and condenser give off heat and require good

ventilation to operate correctly and save energy.

3. Ensure the appliance is away from any sources of

heat (direct sunlight, electric stove, etc.).

The product was designed exclusively for "built in"

installation and must not be directly exposed to

atmospheric agents.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the

refrigerator by tightening or loosening the front or rear

feet.

Electrical connections

After the appliance has been transported, carefully

place it vertically and wait at least 3 hours before

connecting it to the electricity mains. Before inserting

the plug into the electrical socket ensure the following:

• The electrical outlet is grounded and compliant with

all electrical codes.

• The outlet can withstand the maximum power of the

appliance, which is indicated on the data plate

located on the right side of the horizontal surface in

the top compartment, under the thermostat (e.g. 150

W).

• The voltage is within the range of values indicated on

the data plate located on the right side of the

horizontal surface in the top compartment, under the

thermostat (e.g. 110V).

• The outlet is compatible with the plug of the

appliance.

If the outlet is incompatible with the plug, ask an

authorised technician to replace it ( see Assistance ).

Do not use extension cords or multiple sockets.

! Once the appliance has been installed, the power

supply cable and the electrical outlet must be easily

accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should

these safety measures not be observed.