Ariston Fridge/Freezer Combined Panduan Instalasi dan Penggunaan - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Penggunaan untuk Kulkas Ariston Fridge/Freezer Combined. Ariston Fridge/Freezer Combined 16 halaman. Ariston installation and use manual fridge/freezer combined
- 1. Safety - a Good Habit to Get into
- 2. Installation
- 3. Close-Up View
- 4. The Display
- 5. How to Use the Display
- 6. How to Use the Refrigerator Compartment
- 7. How to Use the Freezer Compartment
- 8. Ice Trays
- 9. Meat and Fish
- 10. Fruits and Vegetables
- 11. Tips on Saving Energy
- 12. Alarm Buzzers and Visual Warnings
- 13. Door Open Alarm
- 14. Defrosting
- 15. Cleaning/Maintenance of Parts
- 16. Is There a Problem
Ice trays
This new concept of ice trays is an exclusive Merloni patent.
The fact that they are situated on the top part of the freezer
drawers ensures greater ergonomics and cleanliness and
leaves more room free inside the drawers : the ice no longer
comes into contact with the food placed inside the freezer
compartment; furthermore, the dripping of the water during
MAX
filling is avoided (a lid to cover up the hole after filling with
WATER LEVEL
water is also provided).
Instructions for use (Fig. 2)
Fill up the tray with water via the special hole up to the level
indicated (MAX WATER LEVEL), taking care not to exceed it:
inserting more water than is necessary will lead to the
formation of ice which could obstruct the exit of the ice
cubes.
If you have used an excessive amount of water, you will
have to wait until the ice has melted, empty out the tray
and re-fill it with water.
Fig. 2
Once you have filled the ice tray up with water through the
hole indicated, turn it by 90 °. Thanks to the connected
compartments, the water fills up the special shapes, after
which you can cover the hole up with the special cap and
place the ice tray in the inner door of the freezer
compartment.
Once the ice has formed, all you need to do is to knock the
tray against a hard surface so that the ice cubes come away
from their housing and come out of the same hole used to
fill the tray with water. To make it easier for the ice cubes to
come out, wet the outside of the tray.
WARNING: every time you fill up the ice tray with water ,
make sure that the same is completely empty and that there
are no traces of ice left inside it.
The minimum time required for ice to form well is
approximately 8 hours.
GB
19