Ariston SD1721 Informasi Layanan - Halaman 5

Jelajahi secara online atau unduh pdf Informasi Layanan untuk Kulkas Ariston SD1721. Ariston SD1721 15 halaman. Freestanding larder fridges

Indesit

Company

MODEL INTRODUCTION

The models included in this publication are 1500 and 1700 mm high larder fridges, introduced in

March 2007. All models are similar with regard to the furniture design, but there are variations for

energy-banding (A and A+), exterior colour and 'V' models that have an air circulation fan.

For banding and colour information, refer to the Front Cover and/or Specifications page.

The appliance is 'wet wall' design so defrosting is automatic, with the water draining into a gutter and

a dissipator. Doors are reversible but do require a T20 Torx key to remove the plinth/kick strip.

A thermostat mounted behind the control panel/top facia controls the temperature; the door switch is

also mounted in the same area.

JOINING MODELS & JOINING KIT OVERVIEW

Model numbers with the suffix 'J' (= JOINING) at the end, signify that the model can be joined/linked

to the freezer. Example: SD1722J joined to UP1722J.

A joining kit is available and full instructions will be included with the kit. Similar instructions are also

published in this manual.

When installing and joining these models together, the larder fridge must always be on the right

hand side with the matching freezer on the left hand side. The fridge is supplied with the door hinged

on the right hand side whereas the freezer door will be on the left hand side, i.e. both grab handles

positioned in the middle.

The reason for the positioning is that the freezer has extra system pipework routed up and down,

close to its right hand side panel. The affect of this, is to warm the side panel and in doing so,

removing the risk of cross-ambient temperatures between the fridge and freezer, which would

otherwise cause condensation.

MICROBAN® (Hygiene Control)

All models have Microban® - built in anti-bacterial protection for life of the product.

Food safety is becoming increasingly important to consumers with more and more cases of food

poisoning. Microban® is the number one brand name in antibacterial products. Microban® is built

into the plastic of the fridge interior during manufacture so it cannot wash or wear out.

It provides permanent protection against bacteria as it reduces on contact the spread of food

poisoning bacteria, which can cause contamination and odour.

It gives extra hygiene reassurance as it kills or inhibits the growth of any bacteria, which may come

into contact with the interior surfaces of the fridge.

Microban® is approved safe for use in food contact applications by the European Scientific

Committee for Food and has proven safe over many in personal care and household cleaning

products.

Service Manual UK

English

5 of 15