Whirlpool 6ALBR5233JQ0 Panduan Servis - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Servis untuk Mesin cuci Whirlpool 6ALBR5233JQ0. Whirlpool 6ALBR5233JQ0 23 halaman. Top load washing machine

Halaman Cetak

1. Service Manual
2. Testing and Checking Atc System
3. Servicing the Atc Components
4. Test Procedure
5. Controls and Rear Panel Parts
6. Agitator, Basket and Tub Parts
7. Brake, Clutch, Gearcase, Motor and Pump Parts
8. Machine Base Parts

WHIRLPOOL CONSUMER SERVICES

With the temperature selector switch set to COLD, the cold water solenoid energised for 100%

of the time and the hot water solenoid is cycled on and off (See Figure 3).

With the temperature selector switch set to WARM, the hot water solenoid energised for 100%

of the time and the cold water solenoid is cycled on and off (See Figure 4).

Note : During the warm water fill, both solenoids are energised for 55 seconds. After

55 seconds, the hot water inlet valve stays on and the cold water inlet valve

cycles.

The ATC is only active during the wash fill, it has no effect on the rinse water temperature.

Model 6ALBR5233JQ0

Page 4 of 23