Whirlpool 7MWTW1950EW Panduan Penggunaan dan Perawatan - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Mesin cuci Whirlpool 7MWTW1950EW. Whirlpool 7MWTW1950EW 33 halaman. Top-loading washer
Juga untuk Whirlpool 7MWTW1950EW: Panduan Petunjuk Instalasi (16 halaman)

Halaman Cetak

TROUBLESHOOTING

First try the solutions suggested here or consult the warranty sheet in the washer for assistance and to possibly avoid a service call.

If you experience

Washer Not Performing As Expected (cont.)

Fabric damage

Odors

Lid Locked light

is flashing

Single-dose laundry

packet not dissolving

Washer pumps out water

before finishing cycle

Possible Causes

Liquid chlorine bleach may have

been added incorrectly.

Garment care instructions may not

have been followed.

Monthly maintenance not done

as recommended.

Using too much detergent.

The lid is not closed.

A cycle was stopped or paused using

the Inicio/Pausa (Start/Pause) button.

Adding laundry packet incorrectly.

Lid is left open for more than

10 minutes.

Do not place load items on top of bleach dispenser when

loading and unloading washer.

Always read and follow garment manufacturer's care label

instructions. See the "Cycle Guide" to match your load with the

best cycle.

See "Washer Care" in "Washer Maintenance".

Unload washer as soon as cycle is complete.

Be sure to measure correctly. Always follow the manufacturer's

directions.

See "Washer Care" section.

Close the lid. The washer will not start or fill with the lid open.

The washer may still be spinning. The lid will not unlock until the

basket has stopped spinning. This may take several minutes if

washing large loads or heavy fabrics.

Be sure laundry packet is added to washer basket before adding

clothes. Do not add packet to dispenser. Follow the

manufacturer's instructions to avoid damage to your garments.

Make sure lid is closed before starting a cycle and/or during

prewash (soak).

Solution