Whirlpool 8578566 Panduan Penggunaan dan Perawatan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Mesin cuci Whirlpool 8578566. Whirlpool 8578566 44 halaman.

Halaman Cetak

Tools and Parts

Gather the required tools and parts before starting installation.

The parts supplied are in the washer basket.

Tools needed:

Pliers that open to 1

" (3.95 cm)

Flashlight (optional)

Adjustable or open end wrench

Level

Wood block

Utility knife

Measuring tape

T-20 TORX

®†

screwdriver

Phillips screwdriver

Parts supplied:

A. U-shaped hose form

B. Water inlet hoses (2)

C. Inlet hose washers (2)

†®TORX is a registered trademark of Textron Innovations Inc.

INSTALLATION REQUIREMENTS

" (14 mm)

D. Inlet hose washers/screens (2)

E. Spoke with 4 clear plastic plugs

F. Black plastic plugs (2)

Alternate Parts

Your installation may require additional parts. For ordering

information, please refer to the "Assistance or Service" section of

this manual.

If You Have:

Laundry tub or

standpipe taller

than 72" (183 cm)

1" (2.5 cm)

diameter

standpipe

Overhead sewer

Lint clogged drain

Water faucets

beyond reach of

fill hoses

Must also order:

Installing new

water inlet hoses

Pedestal

You may order a pedestal separately for this washer. This

pedestal will add about 12" (30.48 cm) to the height of your unit

for a total height of approximately 45" (114.3 cm).

To order, call the dealer from whom you purchased your washer

or refer to the "Assistance or Service" section of this manual. Ask

for Model Number LAB0050PQ.

Stack Kit

Are you planning to stack your washer and dryer? To do so you

will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your washer

or refer to the "Assistance or Service" section of this manual. Ask

for Part Number 8182452.

You Will Need to Buy:

Sump pump system (if not already

available)

2" (5 cm) diameter to 1" (2.5 cm)

diameter standpipe adapter,

Part Number 3363920

Standard 20 gal. (76 L) 39" (99 cm) tall

drain tub or utility sink, sump pump and

connectors (available from local

plumbing suppliers)

Drain protector, Part Number 367031

2 longer water fill hoses:

6 ft (1.8 m) Part Number 76314,

10 ft (3.0 m) Part Number 350008

British to universal hose adapter,

Part Number 3357451

British to universal hose adapter,

Part Number 3357451

Options

Optional pedestal