Whirlpool AWT 4103 Petunjuk Penggunaan Manual - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan Manual untuk Mesin cuci Whirlpool AWT 4103. Whirlpool AWT 4103 19 halaman.

Halaman Cetak

Whirlpool AWT 4103 Petunjuk Penggunaan Manual

CONSUMPTION DATA

Temperature Selector

Programme

(°C)

Cotton

Mixed Cotton/

Synthetic

Delicate

Wool

Handwash

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized

conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in

the table in relation to the water supply pressure and temperature, the load and the type of wash.

The data on the "Energy Label" refer to the programme "Cotton 60°C".

* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the

water out.

PREPARATION OF WASH CYCLE

1. Load the machine, close the drum doors and

check that they are properly locked.

2. Add detergents and additives into the dispenser

to no more then the "MAX" level mark, as

follows:

•

Programme with pre and main wash

•

Main wash programme without prewash

•

Fabric softeners and conditioners

•

Chlorine bleach

•

Stain remover agents

•

Anti-scale agents (if necessary)

3. Turn the programme selector knob to the

desired programme.

4. Turn the temperature selector knob to the

desired temperature.

5. Turn the spin speed selector knob to the

desired spin speed. If the spin speed "0" is

selected, the final spin is cancelled, but not the

intermediate spins. The programme ends with a

drain cycle.

Load

Water

Energy

Approx. Programme

Duration

(kg)

(l)

(kWh)

(hours : minutes)

5.0

63*

1.80

5.0

0.95

5.0

0.55

2.0

0.80

2.0

0.40

1.5

0.55

1.0

0.50

1.0

0.30

SELECT THE DESIRED OPTION

Selecting or deselecting an option can be done at

any time during the programme. The option will

be applied as long as the corresponding

programme phase has not been executed yet.

"Intensive Rinse" button

• One rinse cycle is added to ensure a more

intensive rinse.

• This option is particularly suitable for areas with

very soft water, washing baby linen and people

with detergents allergies.

"Half Load" button

• Can be used for small loads and lightly soiled

laundry.

• Reduces the water consumption especially during

the rinses.

"Rinse Hold" button

• The laundry remains in the last rinse water

without progressing to the final spin cycle to

avoid creasing and prevent colours from fading.

• This option is particularly recommended for the