Whirlpool 22' TO 25' NO-FROST DESIGNERSTYLE TOP FREEZER REFRIGERATOR WITH THIRSTCRUSHERDISPENSING SYSTEM Panduan Penggunaan & Perawatan - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Penggunaan & Perawatan untuk Kulkas Whirlpool 22' TO 25' NO-FROST DESIGNERSTYLE TOP FREEZER REFRIGERATOR WITH THIRSTCRUSHERDISPENSING SYSTEM. Whirlpool 22' TO 25' NO-FROST DESIGNERSTYLE TOP FREEZER REFRIGERATOR WITH THIRSTCRUSHERDISPENSING SYSTEM 26 halaman. 22’ to 25’ no-frost designerstyle top freezer refrigerator with thirstcrusher dispensing system

Halaman Cetak

Adjusting

the EZ-TRACKTM SPILLGUARDTM

refrigerator

shelf

The EZ-TRACK shelf slides from side to side for more

flexible storage in your refrigerator.

To slide shelf side to side:

Lift slightly on shelf front.

2. Slide to desired location.

3. Lower shelf front to level position.

NOTE:

You do not have to remove small items from

the shelf before moving it side to side. You may need

to remove larger items.

To remove the shelf:

Remove all items from the shelf.

2. Hold back of shelf with one hand.

3. Lift front of shelf to 45" angle.

4. Lower shelf slightly to release shelf from upper

channel of track. Then pull shelf straight out.

NOTE:

Shelf is heavy. Make sure you use both hands

when removing shelf.

To remove shelf track:

Lift both sides of track slightly.

2. Pull track straight out.

To replace shelf track:

Guide track hooks into the shelf support slots on

the back wall of the cabinet.

NOTE:

Make sure both track hooks are in slots and

that the slots are parallel to each other.

2. Push track backward and down.

3. Check that track is completely seated in the

shelf supports.

then slide to new locatlon.

Upp:r channel

Hold with both hands

and lift front to 45" angle.

Make

sure

both

sets of

hooks

are in

support

slots.

Hold both sldes and

lift up and out.

' '

Shelf

L support