Whirlpool 2303822 Penunjuk Layanan

Jelajahi secara online atau unduh pdf Penunjuk Layanan untuk Kulkas Whirlpool 2303822. Whirlpool 2303822 15 halaman. Top mount and sxs refrigerators

orth

mericAN

ppliANce

FOR IMMEDIATE ATTENTION OF YOUR SERVICE DEPARTMENT

Top Mount and SXS Refrigerators

Warm Temperatures Due To Incomplete Defrost

customer's concern:

Ice may build up on evaporator over a period of time due to incomplete defrost cycles resulting in warm temperatures.

cause:

ADC's, adaptive defrost controls, initialize a defrost cycle based on several factors. These factors include the length of time

between previous defrost cycles and the length of the time the defrost heater is energized. It may be possible that abnormal

ambient temperature, humidity, interior heat load, and customer usage can result in the ADC not initiating a defrost cycle before

the frost accumulation becomes excessive. This may result in a small amount of frost or ice left on the evaporator coil the next

defrost cycle. Once this occurs, the accumulation of ice will gradually build over a period of time until the air flow through the

evaporator is restricted resulting in warmer temperatures.

Eliminate the ADC routine built into the ADC control by cutting out a resistor on the board.

There are two types of ADC controls: ADC2000 and ADCWFI

See Table1

Type

ADc 2000

(coNTRol-eleK,ADc2000)

ADCWFI (water filter indicator)

(PcA & bRKT ASSY-ADc/FD/WFI)



Service Pointer

roup

MoDel NuMbeRS: See ATTAcheD lIST



Part Numbers

2303824, 2303825, 2303826, 2302564,

2304099

2303821, 2303822, 2303823, 2304069,

2304093, 2304143, W10135899, W10135900,

W10135901

Table 1



8178769C

March 2009

