Whirlpool 3ET18ZK Panduan Penggunaan dan Perawatan - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Kulkas Whirlpool 3ET18ZK. Whirlpool 3ET18ZK 19 halaman. No-frost refrigerator-freezers
Juga untuk Whirlpool 3ET18ZK: Panduan Penggunaan dan Perawatan (21 halaman)
Halaman Cetak
If You Need Assistance
Or Service
This section is designed to help you save the cost of a service call. First we outline possible problems,
their causes and their solutions. However, you may still need assistance or service. When calling an
authorized WhirlpoolSM service company for help or calling for service, you will need to provide a
complete description of the problem, your appliance's
complete model and serial numbers and the
purchase date. (See page 2.) This information is needed to respond to your request properly.
1. Before
calling
for assistance
. . .
Performance
problems often result from little things you can find and fix without tools of any kind. Please
check the chart below for problems you can fix. It could save you the cost of a service call.
PROBLEM
POSSIBLE
CAUSE
SOLUTION
Your refrigerator
The power supply cord is not
Firmly plug power cord into a live circuit
will not operate
plugged into a live circuit with
with proper voltage. (See page 5.)
proper voltage.
A household fuse has blown or
Replace household fuse or reset circuit
circuit breaker tripped.
breaker.
The Refrigerator Control is not
Set Refrigerator Control to a numbered
set correctly.
setting. (See page 7.)
Unfamiliar
There is something on top of or
Remove item from on top of or behind
sounds
or a
behind the refrigerator.
the refrigerator.
rattling/jingling
The sounds are normal.
noise
New features on your new refrigerator
make new sounds. (See "Understanding
the sounds you may hear" on page 12.)
There is water in
This is normal in hot, muggy
Make sure the refrigerator is level so the
the defrost
pan
weather. The pan may even be
pan does not overflow.
half full.
The lights do
not work
The motor
seems to run
too much
A household fuse has blown or
circuit breaker tripped.
The power supply cord is not
plugged into a live circuit with
proper voltage.
The bulb is burned out.
The condenser coils are dirty.
It is hot outside or in the room.
Thedoorhasbeenopened
frequently.
A large amount of food has
been put in at one time.
Replace household fuse or reset circuit
breaker.
Firmly plug power cord into a live circuit
with proper voltage. (See page 5.)
Replace bulb. (See page 11.)
Clean the coils (See page 14.)
On hot days, or if the room is too warm,
the motor naturally runs longer.
Open the door as few times as possible.
The motor will run longer in order to cool
down the interior when food is added.
17