Whirlpool 3XARG493WP02 Panduan Penggunaan dan Perawatan - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Kulkas Whirlpool 3XARG493WP02. Whirlpool 3XARG493WP02 26 halaman.

Tools needed:

X6" Hex-head socket wrench, No. 2 Phillips

screwdriver, Flat-head screwdriver, %" Open-

end wrench.

IMPORTANT:

Before you begin, turn refrigerator OFF,

unplug It, and remove any food from door

shelves.

Remove base grille.

When removing hinges, keep doors closed

until ready to lift free from cabinet.

To remove doors, start at the top hinge and

work your way down.

To remove the centre hinge screws, remove

the centre hinge pin by turning it %" to %"

turn. It will pop up.

To replace doors, start at the bottom hinge

and work your way up.

Line up doors so they are centred between

the sides of the cabinet and parallel with

each other.

Seal all unused holes with screws or plastic

plugs. Moisture will enter any openings.

Door seal may be adjusted by adding or

removing shims to the centre and bottom

hinges.

NOTE: When replacing the doors, set the door

gap at 17 mm ('36").

Top hinge

Screws/

Centre hinge

Bottom

hinge