Whirlpool 4322658A Manual - Halaman 19
Jelajahi secara online atau unduh pdf Manual untuk Kulkas Whirlpool 4322658A. Whirlpool 4322658A 48 halaman. In-door ice system
Halaman CetakREMOVING THE EMITTER & RECEIVER MODULES
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
1.
Disconnect the unit from the electrical
supply.
NOTE: If either the emitter or receiver board
fails, both of the boards will have to be re-
placed. The part numbers for the emitter and
receiver boards will be substituted with a single
kit number, which includes both boards.
2.
To remove the emitter module:
a) Open the freezer door.
b) Remove the three screws from the mod-
ule.
Screw (1 of 3)
Emitter
Module
c) Pull the module out and remove the
connector from the board.
Connector
3.
To remove the receiver module:
a) Open the freezer door.
b) Remove the three screws from the mod-
ule.
c) Pull the module out and remove the
connector from the board.
4-5
Receiver Module
Screw (1 of 3)
Connector