Ariston ASL 75 CXS NA Manual Perbaikan - Halaman 15

Jelajahi secara online atau unduh pdf Manual Perbaikan untuk Pengering Ariston ASL 75 CXS NA. Ariston ASL 75 CXS NA 18 halaman. Condensation dryer
Juga untuk Ariston ASL 75 CXS NA: Lembar data (1 halaman), Brosur & Spesifikasi (8 halaman), Panduan Penggunaan dan Instalasi (40 halaman), Buklet Perawatan, Penggunaan, dan Pemasangan (40 halaman)

13. DRUM BELT & BEARING BLOCK

•

With the Bearing Block Cover removed, remove the two Phillips screws that attach the Drum Grounding Strip (Fig. 13-3). Then

using a Needle Nose Pliers remove the Drive Pin (Fig. 13-4).

TECH NOTE: Be careful not to damage the Drive Pin, since you will need to reuse it.

BEARING BLOCK: At this point the Bearing Block can be replaced if required.

• Then remove the Drum Belt from the Motor and Pulley Wheel (see Section 12, pages 10 & 11).

•

Next, remove the Right Side Strut (Fig.13-5). Then separate the Rear Panel from the Drum and slide the Drum Belt off the Drum.

REPAIR MANUAL

Fig. 13-1

Fig. 13-3

• To remove Drum Belt (Fig. 13-1), first

remove the Top Panel (see Section 3,

page 3) and the Right Side Panel (see

Section 10, page 8).

• Then remove the two Phillips screws

that attach the Bearing Block Cover to

the Rear Panel (Fig. 13-2).

Fig. 13-2

Fig. 13-4

ASL75CXS NA

Fig. 13-5

Page: 12