Ariston TCF 87B Buklet Instruksi - Halaman 6

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Pengering Ariston TCF 87B. Ariston TCF 87B 17 halaman.

Halaman Cetak

19510300500_AUS

English, All Logos to be Ariston

The Display

The Display has three main functions each with its corresponding button

Dryness

Sensing Levels

After selecting a programme that has a Sensing Dry Option, press and release the button until the required

dryness sensing level is displayed. If the sensing option is not available the display will flash and the buzzer

beeps three times.

! Some sensing programmes do not have all seven dryness level options

Dryness levels available

Timed Dry

After selecting a Programme that has a Timed Dry Option, press the Timed Button and the Timed Dry Icon will light, the

display will reduce the selected time each time you press and release this button (see Start and Programmes). Each

programme that has a timed option has different times available and the selection of

depends on the heat setting that you have selected

Each press of the button decreases the drying time.

If you change your mind, press the sensing button and sensing level options are available

If the Timer Dry option is not available the display will flash and the buzzer beeps three times.

The selected time remains displayed after the programme starts and can be changed during the programme if you

wish.

Delay Timer

After selecting a Programme that has a Delay Timer Option a delay start time can be selected.

Each press of the Delay button

and then Increments from

For delays of 10 hours or more the display counts down the time in hours until 10 hours, then the display

shows

minutes and then count down in minutes for all of the delay.

After the Start/Pause Button

When the delay period finished the

Note: During this period the clothes will tumble occasionally to help prevent creases developing.

Time to End

If the delay icon

When timed programmes are selected the time displayed throughout the cycle is the actual time remaining.

When an Automatic programme is selected the time displayed is an estimate of the time remaining. When the

programme is selected the display shows the time required to dry a full load, after around 10 minutes the

controller calculates a better estimate of the cycle time

The time to end is displayed in hours and minutes and counts down each minute.

The colons between the hours and minutes display flashes to show that the time is counting down.

The Display also shows if there is a problem with your dryer, if this occurs the display will show F followed by

a fault code number, the three option lights and the pause light will also flash Orange. (see Troubleshooting).

TD4252FUH Issue 1

Damp Dry: Dries your items ready to be ironed using a machine or rotary ironer.

Iron Dry: Dries your items ready to be ironed using a hand iron.

Hanger Plus Dry: Dries you delicate items ready to hanged for final drying.

Hanger Dry: Dries you items ready to hanged for final drying.

Light Dry: Dries you delicate clothes ready to be put away.

Cupboard Dry: Dries your items ready to be put away.

Extra Dry: Dries your clothes ready to be worn.

advances the delay setting in 30 minutes increments from

and then counts down in minutes. For delays 9 hours or less the display shows hours and

is pressed the delay time can be changed or cancelled.

is off the time displayed is the Time to End of the programme running.

{PDF Created 18/01/13 22:28:00}

then

and then after five seconds cancels the delay.

symbol is off and the Time to End is displayed.

and this is updated during the programme.

up to 11

drying times will also