AEP transducers ForceKAL Panduan Operasional - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Operasional untuk Alat Ukur AEP transducers ForceKAL. AEP transducers ForceKAL 13 halaman.

41126 Cognento (MODENA) Italy

Internet: http://www.aep.it

Serial communication

From the main menu you can select your Reference Instrument using the Select Reference

Instrument selection.

For your comfort the main data of the selected Reference Instrument are replicated in the

main Window.

To establish a proper serial communication between the PC and the instrument you have to

set :

Baud rate : same as the one selected on your instrument. For TA2USB and MP10Plus

any selection is valid. For TAUSB is fixed to 38400

COM PORT : (COM1, COM2 ...) if you don't know it please check in the Windows Control

Panel

Decimal : the point position for the acquired data .

If the PC does not have a serial input please use a RS232CUSB adaptor.

Data receiving and remote commands

In the window Receiving Data and Remote Commands you can see the Force Value

transmitted from the instrument in real Time.

It is possible to act on some commands (zero, resolution etc) to better operate on your

instruments remotely.

In some kind of tests can be useful to use the peak function

The window Device in Calibration allows you to set the main data of your instrument to in

calibration.

All these information will be stored and printed in the report.

Objetc : Generic field normally used to define the machine type. (for example Testing

Machine)

Type :

Serial Number:

Maker: Here you have to set the data of the machine in calibration (example "TMM350")

Max Force: This is the max Force allowed for the machine or ,if during calibration you want to

reach a lower load, the maximum load during calibration.

Unit: The load unit used. Please controls that the reference instrument and the device in

calibration are set with the same load unit.

Resolution: Set the best resolution you can obtain from the device in calibration.

Calibration Certificate: Set here the number assigned to the certificate. This is a free text

field

_______________________________________________________________________________

Via Bottego 33/A

Pag. 6

Tel: +39-(0)59 346441

Fax: +39-(0)59-346437